Powerbook G4 Titanium 400/500 Repair Guide - Powerbook Medic
Powerbook G4 Titanium 400/500 Repair Guide - Powerbook Medic
Powerbook G4 Titanium 400/500 Repair Guide - Powerbook Medic
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
After the initial bond is broken, you need<br />
to work your way around the display to<br />
break the bond. Do this slowly. If you try<br />
to do too much at one time you’ll dent<br />
your display casing. Again, only grasp<br />
from the sides. If you are performing the<br />
hinge repair only break the bond up to<br />
about 3-4” along the side…you want to<br />
break the bond as little as possible as it<br />
will be a cleaner repair when you are<br />
done.<br />
Display Cable Replacement<br />
If you are replacing the hinges, skip these<br />
next steps for the display cable removal.<br />
Break the bond all the way around three<br />
edges of the display. Do not break the<br />
bond on the top of the display (side with<br />
screen latch mechanism) unless<br />
absolutely necessary. It is very difficult to<br />
put the casing back together if you break<br />
the top bond.<br />
Page 30 of 44<br />
Copyright © 2004 <strong>Powerbook</strong>medic.com. All rights reserved.
Change language