EYW300 novaWeb: Operation (7001049003) - sauter-controls.com ...

EYW300 novaWeb Operation
Installations 7
Next, you can specify certain days or periods when these profiles should not be
executed (inactive) or when the profile for the exception days should apply.
Dates are written using YYMMDD and intervals using YYMMDD-YYMMDD
Dates and intervals must be separated with a comma.
In the example above, during the holiday season (1 st of July until 31 st of July 2004) and
on Christmas eve (24 th of December 2004), no time profile will be executed. On the 28 th
of February 2004 as well as the 27 th of March 2004, the "Exception" time profile will be
executed instead of the normal time profile of this weekday (e.g. instead of the Saturday
profile).
NOTE
The first entry for ON/OFF under "Profile 1" should not be deleted.
The time programme can, however, be deactivated by removing the tick for the
weekdays in the first line. Time programmes from "Profile 2" can be deleted completely.
7.3.4 Command
Auto
Off
On
According to the type of command, you can choose to switch this address to the
automatic state, switch it off or switch it to any given position.
7.3.5 Change of values
54
°C
To change a value, you just enter the new value and hit return.
7.4 Additional links
Apart from your installation view, you could get some additional links like the following:
[ Functional description ] [ Schematics ] [ Service ] [ System maintenance ]
Depending on your installation, you get some further information about your system
under the link to the functional description (an HTML document) or to the schematics.
For more detailed information, there is a service list and a system maintenance list for
the user with the appropriate rights.
7.4.1 Functional description
The existence and content of the functional description depends on your installation. It
usually contains some information on how your site works.
7001049003 A Sauter Systems 27