EYW300 novaWeb: Operation (7001049003) - sauter-controls.com ...
EYW300 novaWeb: Operation (7001049003) - sauter-controls.com ...
EYW300 novaWeb: Operation (7001049003) - sauter-controls.com ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8<br />
<strong>EYW300</strong> <strong>novaWeb</strong> <strong>Operation</strong><br />
Alarms<br />
8.3 Acknowledging<br />
If a new alarm appears, it will <strong>com</strong>e up with the Acknowledge link, to indicate that it has<br />
not yet been acknowledged. After it has been acknowledged, the alarm stays active if<br />
the alarm condition is still met; if not, the alarm will disappear.<br />
An alarm will be treated as normal (not active) only after the alarm condition has<br />
disappeared and (!) the alarm has been acknowledged.<br />
NOTE<br />
Acknowledgement occurs only on the <strong>novaWeb</strong> level.<br />
8.4 System errors<br />
Some alarm data points are generated automatically by the system to indicate critical<br />
system errors:<br />
OK novaNet Bus failure 2004-07-20 13:59:25 sys.<strong>sauter</strong>.busfail.al<br />
A novaNet bus failure is shown whenever no <strong>com</strong>munication arrives within a certain time<br />
period.<br />
OK novaNet AS 10 failure 2004-07-20 16:55:09 sys.<strong>sauter</strong>.as10.al<br />
For each AS, an alarm is generated to indicate a <strong>com</strong>munication error to this AS.<br />
8.5 Additional information on alarms<br />
The alarm list may contain a link ('Operating Instructions, Alarm') depending on the<br />
installation (see <strong>novaWeb</strong> <strong>EYW300</strong> programming manual; document 7001050).<br />
If you activate the link, the text appears that was saved in the 'alarm.html' file on the<br />
<strong>novaWeb</strong> <strong>EYW300</strong> (e.g. information on the behaviour when an alarm occurs).<br />
32 <strong>7001049003</strong> A Sauter Systems
Change language