Novell eDirectory 8.8 Troubleshooting Guide - NetIQ
Novell eDirectory 8.8 Troubleshooting Guide - NetIQ
Novell eDirectory 8.8 Troubleshooting Guide - NetIQ
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2Installation and Configuration<br />
• Section 2.1, “Installation,” on page 9<br />
• Section 2.2, “Configuration,” on page 11<br />
• Section 2.3, “Multiple Instances,” on page 12<br />
2.1 Installation<br />
This section discusses various problems you may encounter during the <strong>eDirectory</strong> <strong>8.8</strong> installation<br />
alongwith troubleshooting tips.<br />
• Section 2.1.1, “Installation Not Successful,” on page 9<br />
• Section 2.1.2, “Installation Takes a Long Time,” on page 10<br />
• Section 2.1.3, “<strong>eDirectory</strong> Install Fails for Container Administrators,” on page 10<br />
• Section 2.1.4, “Unable to Install into an Existing Tree over the WAN,” on page 10<br />
• Section 2.1.5, “NICI Installation Failed - 1497,” on page 11<br />
• Section 2.1.6, “Naming Objects,” on page 11<br />
• Section 2.1.7, “NICI Does Not Get Installed in the Server Mode on Windows,” on page 11<br />
• Section 2.1.8, “Tarball Upgrade Fails With "Cannot open or remove a file containing a running<br />
program" Error Message,” on page 11<br />
2.1.1 Installation Not Successful<br />
• Check for the following error message in the /var/adm/messages directory:<br />
Unable to bind to SLP Multicast Address. Multicast route not added?<br />
This message is displayed if the Linux or Solaris machine is not configured for a multicast<br />
route address.<br />
Add the multicast route address and restart the slpuasa daemon.<br />
• If the -632: Error description System failure error message appears during<br />
installation, exit from the installation process.<br />
Set the n4u.base.slp.max-wait parameter to a larger value, such as 50, in the /etc/opt/novell/<br />
<strong>eDirectory</strong>/conf/nds.conf file, then restart the installation process.<br />
• During installation, if the Tree Name Not Found error message is displayed, do the<br />
following:<br />
1 Check whether multicast routing is enabled on the Solaris host that you are installing the<br />
product on.<br />
2 Specify the IP address of the master server of the Tree partition.<br />
2<br />
novdocx (ENU) 01 February 2006<br />
Installation and Configuration<br />
9
Change language