OneSight Release Notes
OneSight Release Notes
OneSight Release Notes
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
When using the VQ Probe with G5 1.6 with more than one protocol,<br />
Skinny must be configured ahead of H323. If it is not,<br />
HTIPSigserver cannot be started.<br />
DTMF may not be sent correctly when the DTMF Type is set to In<br />
Band for highly compressed codecs.<br />
<strong>OneSight</strong> Voice Engine and <strong>OneSight</strong> Voice Quality – Advanced<br />
Monitors - There is a limit to the number of monitors that can be<br />
configured on a Data Collector. To avoid overloading a Data Collector, it<br />
is recommended that no more than thirty-five OSVE scripts with less than<br />
ten steps be configured on a Data Collector. An indication that a Data<br />
Collector is overloaded can be found by checking for stale samples from<br />
the Support and Diagnostics page in <strong>OneSight</strong>.<br />
<strong>OneSight</strong> Voice Quality – Advanced Monitors Location Tab - When<br />
setting up a <strong>OneSight</strong> Voice Quality Advanced monitor, you must select<br />
only the default location on the locations tab during monitor creation.<br />
Multiple locations are not supported.<br />
Metric Performance Report for Voice Quality Basic monitors – The<br />
Metric Performance Report for Voice Quality Basic monitors cannot be<br />
modified when drilled down to a one hour time frame. The Modify button<br />
is displayed; however, it disappears when you click on it.<br />
VQ Probe - Restarting the HT Server – If you manually restart the HT<br />
Server, only the A side scripts are restarted for the VQ Probe. Restart the<br />
<strong>OneSight</strong> Data Collector to start the B side scripts.<br />
VQ Probe Command Not Completed in Time Error – This error<br />
occurs due to a known FX/TDM issue that causes the HT Server process<br />
to stop. You can avoid this problem either by connecting all of the D-<br />
channels or by stopping the D-channels that are not in use.<br />
VQ Probe - UNIStim – When using the UNIStim protocol, the VQ Probe<br />
always uses the G.711 U-Law protocol to make calls regardless of the<br />
codec selected in the VQ Probe Configuration dialog box.<br />
Data Collectors for WebLogic 9.2 – New Data Collector installations<br />
for WebLogic 9.2 require an update for the OSDC.properties file to<br />
prevent discovery from failing. Add the following line to the<br />
[Agents.JMX] section:<br />
Agents.JMX.MAPPING.weblogic92 = weblogic9.2<br />
Modified Default Alert Message Templates After Upgrade – If you<br />
have modified a default alert message template, changes may not be<br />
6<br />
6 <strong>OneSight</strong> <strong>Release</strong> <strong>Notes</strong>
Change language