CATALOGUE 201ME JANUARY 2004

CATALOGUE 201ME — Page 25
BUILT-IN CHECK VALVE SERIES Refrigerants 22, 134a, 401A, 402A, 404A, 407C, 502, 507
SPECIFICATIONS for REVERSE REFRIGERATION FLOW, Liquid Line Capacity - kW**
VALVE
TYPE
C(M)B9,
C(M)E9
C(M)B10,
C(M)E10
C(M)B14,
C(M)E14
C(M)B19,
C(M)E19
+
CONNECTIONS
Inches
R-22
0.21 bar
5 20
3/8,
1/2 ODF, 3/8 SAE
23.
2 1. 8
1/2
SAE, 1/2, 5/8 ODF
28.
5 6. 7
5/8
ODF
45.
4 2. 9
5/8,
7/8 ODF
32.
7 1. 0
R-134a
0.14 bar
R-401A
0.14 bar
R-402A
0.21 bar
R-404A
0.21 bar
R-407C
0.21 bar
R-502
0.21 bar
R-507
0.21 bar
E VAPORATOR °C
-2
5 -20
5 -20
5 -20
5 -20
5 -20
5 -20
17.
16.
2 19.
3 17.
6 — 13.
7 — 13.
7 21.
5 19.
7 — 13.
7 — 13. 4
21.
19.
7 23.
2 21.
5 — 16.
9 — 16.
9 26.
0 23.
9 — 16.
5 — 16. 5
35.
32.
7 38.
7 35.
9 — 27.
1 — 27.
4 42.
2 38.
7 — 26.
7 — 26. 7
21.
19.
7 23.
2 21.
5 -—
19.
0 -—
17.
9 28.
8 26.
4 -—
19.
3 -—
17. 9
- 5 0
2 9
2 8
4 9
3 8
** Valve sizing should be based on expected reverse liquid flow condensing capabilities of the evaporator(s) being defrosted.
+ Due to flow restrictions, C(M)E19 models capacity does not surpass C(M)E14 model until pressure drop exceeds 0.70 bar.
See Page 21 for Forward Refrigerant Flow.
Liquid capacities shown in the above table are based on 38°C liquid temperature entering the valves.
INDUSTRIAL SOLENOID VALVES
for Air, Water, Steam and Light Oil
DISC TYPE - APPLICATION
These valves are suitable for most types of
industrial applications. Ideal for water, light
oils, air lines to chucking devices, steam
lines, etc. Use the disc type valves for high temperature and steam
applications up to 1.72 bar. Use the teflon diaphragm type valve for
high temperature and steam applications over 0.34 bar (107 °C) but
do not exceed 0.68 bar (115°C).
The W3P1 is the ideal size for use on air chucking devices.
Generally, a very tight seat is required for this type of application.
This can be achieved by using a neoprene seat in the W3P1 in place
of the standard teflon. To order specify RW3P1.
TYPE
W3P1
W6P1
W14P2
W19P2
W25P2
CAPACITIES
STANDARD PORT MOPD
Ar i – m
CONNECTIONS SIZE AC
3 Steam – kg/hr
/ hr
Water
– m /hr
0.34
bar ∆ P
inches
mm bar 0.34 bar 0.69 bar 0.34 bar 1.38 bar Inlet Pressure
∆ P ∆ P ∆ P ∆ P 0.34
bar 0.69
bar
WATTS
1/4
NPT Female
2.77
4.08
5.78
0.11
0.27
3.40
3.90
3/8
NPT Female
4.76
12.
3 18.
4 0.50
1.02
10.
4 11. 8
1/2
NPT Female
11.
1 10.3 41.
1 67.
1 1.34
2.88
34.
9 39. 9
3/4
NPT Female
15.
1
69.
7 104
2.00
4.34
60.
3 68. 5
1 NPT Female
19.
8
126
194
3.29
7.38
101
135
STANDARD
COIL
RATINGS
COIL
10
MKC-1
15
MKC-2
DIAPHRAGM TYPE - APPLICATION
These valves are suitable for most types
of industrial applications. Ideal for water,
light oils, air lines to chucking devices,
steam lines, etc. Use the disc type valves
for high temperature and steam applications up to 1.72 bar. Use
the teflon diaphragm type valve for high temperature and steam
applications over 0.34 bar (107°C) but do not exceed 0.68 bar
(115°C).
Diaphragm type industrial solenoid valves are tight seating in applications
of normal differential pressure. For applications where differential
pressures in the closed position are below 0.34 bar, it is recommended
that a Buna-N diaphragm be used in place of the standard
teflon diaphragm. To order specify BR184P1.
Q>
TYPE
R183P1
BR183P1
R184P1
BR184P1
R246P1
BR246P1
STANDARD
CONNECTIONS
inches
PORT
SIZE
mm
MOPD
AC
bar
0.34 bar
∆P
CAPACITIES
Ar i – m 3
3
/ hr
Water
– m /hr
0.69 bar
∆P
0.34 bar
∆P
1.38 bar
∆P
Steam – kg/hr
0.34
bar ∆P
Inlet Pressure
0.34
bar 0.69
bar
WATTS
3/8
NPT Female 14.
3 10.
3 55.
2 80.
5 1.84
3.66
47.
6 69. 0
1/2
NPT Female 14.
3 10.
3 62.
9 91.
8 2.09
4.16
54.
0 78. 5
3/4
NPT Female 19.
1 10.
3 88.
9 130
2.93
5.86
76.
2 111
Q> “R” type valves have Teflon diaphragm – 115˚C Max. Fluid Temperature; “BR” type valves have Buna-N diaphragm –107˚C Max. Fluid Temperature.
STANDARD
COIL
RATINGS
COIL
10
MKC-1
Use a SPORLAN strainer ahead of every industrial solenoid valve.
For complete information refer to Bulletin 30-10.