Volume II (pdf) - Milestone Construction Services, Inc

COMPARABLE PRODUCT SUBMITTAL FORM
Table of Compliance (Sample)
Shop Drawing and Product Data Submittal
The Contractor shall prepare a Table of Compliance Form similar in format to the sample shown below to
facilitate and expedite the Shop Drawing and Product Data Review. Failure to comply with this
requirement will be basis for rejecting the Submittal.
The Table of Compliance Form will list and compare the performance parameters as the submitted
equipment to that listed on equipment schedule and specifications as basis of design. All non-compliance
items (differences) must be explained in full, indicating their impact, if any, on maintainability, durability,
energy use, operating costs, code compliance and environmental considerations.
(Sample)
TABLE OF COMPLIANCE
EQUIPMENT: _______________________
SPEC. SECTION: _______________________
BASIS OF DESIGN
SAMPLE ITEMS
Flow (Cfm Or Gpm)
Ext. Static Press.
Head (Ft.)
Electrical Requirements
Cooling Capacity
Heating Capacity
Discharge Air Temp.
Filter Type & Eff.
Equipment Eff. (Eer)
Sound Data
Weights
Etc.
DRAWINGS SUBMITTED EXPLANATION
Specifications:
A. Quality assurance
compliance (ARI)
(ASHRAE)
(AMCA)
(UL)
B. Specifications: List each
and every specification
paragraph
C. Etc.
Other:
END OF SECTION
EASTERN DISTRICT POLICE STATION 15050- 14 COMMON WORK RESULTS FOR PLUMBING
28103.01 January 15, 2013