05.08.2014 Views

Volume II (pdf) - Milestone Construction Services, Inc

Volume II (pdf) - Milestone Construction Services, Inc

Volume II (pdf) - Milestone Construction Services, Inc

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

specified or shown on drawings without claim for additional payment.<br />

G. Verify correctness of equipment model numbers and conformance of each component<br />

with manufacturer's specifications.<br />

H. Should any rotating equipment cause excessive noise or vibration, rebalance, realign or<br />

do other remedial work to reduce noise and vibration levels. Excessive is defined as<br />

exceeding manufacturer's specifications for unit in question.<br />

1.7 QUALIFICATIONS<br />

A. Manufacturer: Company specializing in manufacturing Products specified in this section<br />

with minimum five years documented experience.<br />

B. Installer: Company specializing in performing Work of this section with a minimum of five<br />

years documented experience.<br />

1.8 DELIVERY, STORAGE, AND HANDLING<br />

A. Comply with Division 1, Section “Product Requirements” for transporting, handling,<br />

storing, and protecting products.<br />

B. Accept materials on site in original factory packaging, labeled with manufacturer's<br />

identification.<br />

C. Protect from weather and construction traffic, dirt, water, chemical, and damage, by<br />

storing in original packaging.<br />

1.9 ENVIRONMENTAL REQUIREMENTS<br />

A. Section “Product Requirements”: Environmental conditions affecting products on site.<br />

B. Do not apply firestopping materials when temperature of substrate material and ambient<br />

air is not in accordance with the manufacturer’s installation procedures.<br />

C. Maintain manufacturer’s required temperature before, during, and after installation of<br />

firestopping materials for minimum periods of time as required by the manufacturer.<br />

1.10 FIELD MEASUREMENTS<br />

A. Verify field measurements prior to fabrication.<br />

PART 2<br />

PRODUCTS<br />

2.1 MATERIALS<br />

A. Structural Steel: ASTM A 36/A 36M, “Carbon Structural Steel,” 2001, steel plates,<br />

shapes, and bars, black and galvanized.<br />

B. Bolts and Nuts: ASME B18.10 or ASTM A 183, “Track Bolts and Nuts,” 2000, steel,<br />

hex-head, track bolts and nuts.<br />

C. Washers: ASTM F 844, “Standard Specification for Washers, Steel, Plain (Flat),<br />

Unhardened for General Use,” 2005, steel, plain, flat washers.<br />

EASTERN DISTRICT POLICE STATION 15060- 4 HANGERS AND SUPPORTS FOR PLUMBING<br />

PIPING AND EQUIPMENT<br />

28103.01 January 15, 2013

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!