Volume II (pdf) - Milestone Construction Services, Inc

MOSHA - Maryland Occupational Safety and Health Administration
MSSP - Manufacturers Standards Society of the Valve and Fittings
Industry
NEC - National Electrical Code
NEMA - National Electrical Manufacturers Association
NFPA - National Fire Protection Association
OSHA - Occupational Safety and Health Administration
SMACNA - Sheet Metal and Air Conditioning Contractors National
Association
TEMA - Tubular Exchanger Manufacturers Association
UL - Underwriters' Laboratories
1.4 DEFINITIONS
A. Products: Items purchased for incorporating into the Work, whether purchased for Project
or taken from previously purchased stock. The term product includes the terms material,
equipment, system, and terms of similar intent.
B. Substitutions: Changes proposed by Contractor in products, materials, equipment, and
methods of construction required by the Contract Documents.
1.5 SUBMITTALS
A. Comply with Section "Submittal Procedures."
B. Shop Drawings and Product Data:
1. Clearly identify all submittals:
a. Indicate intended application, location, etc.
b. Each submittal shall indicate the associated specification section, and
paragraphs. Do not combine product data and shop drawing submittals
from different spec sections into a single submittal package, even though
they may be the same distributor, vendor or part of a single material
order.
c. Clearly indicate the exact type, model number, size and special features
of the proposed item.
d. Include catalog spec sheets to completely describe proposed equipment.
e. Factory order forms only showing the required capacities are not
acceptable.
f. Identify all options furnished to meet specifications.
g. The Architect shall not select equipment ratings and/or options.
Submittals not properly marked shall be returned without review.
C. Product Substitutions: Comply with requirements of Division 01.
D. Comparable Products Submission:
1. Document each request for a proposed comparable product with supporting data
substantiating compliance of proposed product with Basis-of-Design product.
2. Use the attached “Comparable Product Submittal Form” in addition to the
requirements specified herein.
3. Comparable products will not be reviewed without completion of the attached
form.
E. Closeout Submittals:
EASTERN DISTRICT POLICE STATION 15051 - 2 COMMON WORK RESULTS FOR HVAC
28103.01 January 15, 2013