Model 1835-C - Newport Corporation

1.2 Scope of this manual
Please carefully read this instruction manual before using the Model 1835-C
Multi-Function Optical Meter. Be especially careful to observe the warnings
and cautions throughout this manual. If any operating instructions are not
clear, contact Newport Corporation.
This instruction manual contains the necessary information for operation and
maintenance of the Newport Model 1835-C Multi-Function Optical Meter as
well as information for troubleshooting and obtaining service if necessary.
This information is divided into the following sections:
Section 1
General Information and Functional Description
Section 2
System Operation
Section 3
Principles of Operation
Section 4
Computer Interfacing
Section 5
Computer Command Reference
Section 6
Maintenance and Troubleshooting
Section 7
Factory Service
Appendix A
Syntax and Definitions
Appendix B
Error Messages
Appendix C
Status Reporting System
1.3 Unpacking and Inspection
All Model 1835-C Multi-Function Optical Meters are carefully assembled,
tested and inspected before shipment. Upon receiving this instrument, check
for any obvious signs of physical damage that might have occurred during
shipment. Report any such damage to the shipping agent immediately. Retain
the original packing materials in case reshipment becomes necessary.
1.4 Preparation for Use
The Model 1835-C Multi-Function Optical Meter should have some operations
performed before measurements are made. These include:
Connecting AC Power (Section 2.5)
Detector Connection and Setup (Section 2.6)
1.5 Optional Accessories and Services
The Newport Catalog presents up to date information on the detectors,
detector accessories and detector calibration services available for use with
the Model 1835-C Multi-Function Optical Meter. Refer to Figure 1 for where a
given detector or accessory fits within the Model 1835-C family tree.
2