Icom M801E GMDSS Manual - Zanshin

More documents

Recommendations

Info

8 CALL PROCEDURE ■ Geographical call Use the geographical call when urgency or safety message announcement is necessary to the ships in the particular area. DSC WATCH screen RX 2 4 6 8 12 16 ACK MMSI 123456789 12.345.0 F1B GPS Lat 34 34'N SP Lon135 34'E 12:34 Exit Rotate Area selection ***** Geographical ***** --------- Area --------- ÇCentre-point Area SEL OK Rotate Centre-point input ***** Geographical ***** ----- Centre-point ----- Latitude †_ __'N Longitude ___ __'W Range:_500nm OK Area input DSC menu Rotate ***** Geographical ***** --------- Area --------- Rotate ******* DSC MENU ******* -------- Select -------- Position Auto ACK Individual Group ÇGeographical Position REQ Distress Distress RLY Test Received Call Log TX memory Set up Self test Exit SEL OK Rotate Latitude †_ N-H:__ Longitude ___ W-V:__ OK Call frequency selection ***** Geographical ***** ---- Call frequency ---- Ç 2187.5kHz 4207.5kHz 6312.0kHz 8414.5kHz 12577.0kHz 16804.5kHz SEL OK Category selection 1st telecommand selection Rotate ***** Geographical ***** ------- Category ------- ÇSafety Urgency Rotate ***** Geographical ***** --- 1st telecommand ---- ÇTelephony Telex-FEC SEL OK SEL OK 24
CALL PROCEDURE 8 Rotate Traffic frequency selection ***** Geographical ***** -- Traffic frequency --- <strong>Manual</strong> set ÇT: 2134.0kHz Traffic-1 R: 2134.0kHz T:12345.0kHz Traffic-2 R:12345.0kHz SEL OK ✔ For your information 1— Area input When using the ‘Geographical’ call with “Area” selection, your original position is always the upper left hand corner in the world map as in the following illustration. • Area setting example 1 Latitude 20 N-H:10 Longitude 100 W-V:20 Rotate Maual setting ***** Geographical ***** -- Traffic frequency --- 20˚N/100˚W 20˚N 80˚W TX:†2182.0kHz RX:_2182.0kHz OK 10˚N 100˚W 10˚N 80˚W • Area setting example 2 Latitude 20 S-H:10 Longitude 100 E-V:20 Confirmation screen ***** Geographical ***** --------- Call --------- To area: 14 N-H: 3 125 W-V: 3 Category:Safety Call Freq:TX 2187.5kHz RX 2187.5kHz Traffic:Telephony TX 2182.0kHz RX 2182.0kHz Call Write-Menu 20˚S/100˚E 30˚S 100˚E 20˚S 120˚E 30˚S 120˚E 8 Push and hold for 1 sec. Start calling... Geographical TX < Calling > Push and hold for 1 sec. TX memory channel See p. 23 for details. ✔ For your information 2— Centre-point input When using the ‘Geographical’ call with “Centre-point” selection, calls vessels in the square area (“ ” area; not only round; “ ” area) are called. • Centre-point setting example Exit GPS F1B Lat 34 34'N Lon135 34'E 12:34 Range Centre-point RX Geographical < Traffic > Exit GPS J3E Lat 34 34'N Lon135 34'E 12:34 Announce the safety or urgency information 25
Page 1 and 2: INSTRUCTION MANUAL MF/HF MARINE TRA
Page 3 and 4: IN CASE OF EMERGENCY When your ship
Page 5 and 6: OPERATING RULES AND GUIDELINES 1 Be
Page 7 and 8: PANEL DESCRIPTION 2 !2 FREQUENCY/CH
Page 9 and 10: PANEL DESCRIPTION 2 ■ Handset (HS
Page 11 and 12: PANEL DESCRIPTION 2 q RECEIVE INDIC
Page 13 and 14: SELECTING A CHANNEL/FREQUENCY 3 DUs
Page 15 and 16: RECEIVE AND TRANSMIT 4 ■ Function
Page 17 and 18: CHANNEL NAME PROGRAMMING 5 Up to 8-
Page 19 and 20: FREQUENCY PROGRAMMING 6 ■ Program
Page 21 and 22: DSC PREPARATION 7 ■ Position and
Page 23 and 24: CALL PROCEDURE 8 After 5 sec., star
Page 25 and 26: CALL PROCEDURE 8 Confirmation scree
Page 27: CALL PROCEDURE 8 Confirmaition scre
Page 31 and 32: CALL PROCEDURE 8 ■ Test call Test
Page 33 and 34: WHEN RECEIVING A CALL 9 ■ Receive
Page 35 and 36: WHEN RECEIVING A CALL 9 ■ Distres
Page 37 and 38: WHEN RECEIVING A CALL 9 Rotate Posi
Page 39 and 40: WHEN RECEIVING A CALL 9 ■ Distres
Page 41 and 42: WHEN RECEIVING A CALL 9 Rotate “U
Page 43 and 44: WHEN RECEIVING A CALL 9 ■ Positio
Page 45 and 46: DSC MENU OPERATION 11 ■ General U
Page 47 and 48: DSC MENU OPERATION 11 ■ Verifying
Page 49 and 50: SET MODE 12 ■ Quick set mode DEnt
Page 51 and 52: SET MODE 12 DInitial set mode items
Page 53 and 54: SET MODE 12 DSC data out This item
Page 55 and 56: CONNECTION AND INSTALLATION 13 ■
Page 61 and 62: CONNECTION AND INSTALLATION 13 D Mo
Page 69: OPTIONS 15 AT-141 HF AUTOMATIC ANTE
Page 73: TEMPLATE 16 ■ Speaker (SP-24E) 11
Page 76 and 77: 17 ANTENNA AND GROUNDING CONSIDERAT
Page 78 and 79:
74 MEMO
Page 80:
Icom America Inc. 2380 116th Avenu
show all

Icom M801E GMDSS Manual - Zanshin

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?