Icom M801E GMDSS Manual - Zanshin
Icom M801E GMDSS Manual - Zanshin
Icom M801E GMDSS Manual - Zanshin
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
11 DSC MENU OPERATION<br />
■ Memory reading/deleting<br />
q During setup select menu indication, rotate [CH] to<br />
select the desired memory item then push [ENT].<br />
•Push [DSC] to select DSC watch mode.<br />
•Push [MODE SET] to select DSC menu.<br />
•Rotate [CH] to select “Set up” then push [ENT].<br />
w Rotate [CH] to select the desired memory, then<br />
push [ENT].<br />
******** Set up ********<br />
------ Address ID ------<br />
******** Set up ********<br />
------- Group ID -------<br />
e Operate as follows:<br />
➥When reading the memory contents only;<br />
•Push [ENT] to return to the appropriate memory<br />
list screen.<br />
➥When deleting the memory contents;<br />
•Push and hold [CE] for 1 sec.<br />
-After deleting, the appropriate memory list screen<br />
is displayed automatically.<br />
Name:ICOM M801<br />
ID:012345678<br />
TX: 2345.0kHz<br />
RX: 2345.0kHz<br />
DEL<br />
OK<br />
******** Set up ********<br />
---- Call frequency ----<br />
******** Set up ********<br />
-- Traffic frequency ---<br />
******** Set up ********<br />
---- Scan frequency ----<br />
Comment:ICOM Group<br />
TX: 4567.0kHz<br />
RX: 4567.0kHz<br />
DEL<br />
OK<br />
■ Printing out the DSC memory contents<br />
The received DSC call contents can be printed out<br />
when a printer (IBM ® centronics or compatible) is connected<br />
to the transceiver.<br />
The automatic print out capability when a DSC call is<br />
received is available in initial set mode. (p. 48)<br />
q Select the desired received DSC memory as described<br />
in “Received information” (p. 29).<br />
➥During DSC watch mode, push [RX CLAR] to<br />
enter the received DSC memory select screen.<br />
•Or, push [MODE SET], rotate [CH] to select “Received<br />
Call Log” then push [ENT].<br />
➥Rotate [CH] to select the desired category from<br />
“Distress” and “Others” then push<br />
[ENT].<br />
•“Unread message” is displayed beside category<br />
when an unread message is stored in the category.<br />
•“” is displayed beside category when<br />
no received message is stored in the category.<br />
➥Rotate [CH] to select the desired DSC message.<br />
•“*” means the DSC messages have not been read.<br />
•“DTRS RLY” stands for distress relay.<br />
w Push [ENT] to indicate the contents.<br />
e After pushing [F], push [8 PRN] for 1 sec. to print<br />
out the selected DSC memory contents.<br />
[F]<br />
[8 PRN]<br />
44