06.09.2014 Views

VW 150-5 Workshop Manual - Zanshin

VW 150-5 Workshop Manual - Zanshin

VW 150-5 Workshop Manual - Zanshin

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

♦ G 12 and coolant additives with the reference ”as per TL <strong>VW</strong> 774 D<br />

(C)” prevent frost and corrosion damage, scale deposits and<br />

increase the boiling temperature. For these reasons the cooling system<br />

must always be filled with radiator antifreeze and anti-corrosion<br />

agent throughout the year.<br />

♦ Especially in countries with a tropical climate, the coolant contributes<br />

to the operating safety due to the higher boiling point when the<br />

engine is subjected to heavy loads.<br />

♦ The frost protection must be ensured down to approximately -25 °C<br />

(in countries with an arctic climate down to approximately -35 °C).<br />

♦ The coolant concentration may not be reduced during the warmer<br />

season or in warmer countries by adding water. The coolant additive<br />

share must be at least 33 %.<br />

T10007<br />

♦ If stronger frost protection is required for climatic reasons, the percentage<br />

of G 12 can be increased, however only up to 60 % (frost<br />

protection down to approximately -40 5C), as otherwise the frost<br />

protection will be reduced again and the cooling efficiency worsened.<br />

♦ To determine the current frost protection density, the refractometer<br />

T10007 is recommended.<br />

♦ If the cylinder head or cylinder head gasket has been renewed, do<br />

not reuse used coolant.<br />

W00--0689<br />

19-28

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!