bauer - Zanshin
bauer - Zanshin
bauer - Zanshin
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BAUER<br />
COMPRESSORS<br />
2.4.2 Bottle Filling Procedures<br />
See Figure 2-1<br />
Junior II, Yachting<br />
^ WARNING ^<br />
Do not attach bottles to 4350 psi (300 bar) units unless the bottle is rated for this pressure. (Note pressure<br />
stamped on the tank neck)<br />
^ WARNING ^<br />
Never open the fill valve unless the bottle is connected to the fill hose. Whipping of an unrestrained hose<br />
caused by high pressure air discharge can cause serious injury!<br />
^ CAUTION ^<br />
The filling procedure should not be interrupted for more than 10 minutes to avoid increased CO2 levels in<br />
the air filling the bottle.<br />
Figure 2-1<br />
Air Storage Bottle Valve Operating Sequence<br />
2.<br />
1.<br />
1.<br />
2.<br />
Attaching the Fill Yoke<br />
Opening Sequence<br />
Closing Sequence<br />
2.4.3 Connecting to the Air Storage Bottle<br />
1. Ensure both the fill valve and bottle valve are closed<br />
2. Connect the air bottle to the compressor fill hose utilizing the fill yoke.<br />
Page 11 1st Edition, Rev. 0 Chg 3