bauer - Zanshin
bauer - Zanshin
bauer - Zanshin
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
BAUER<br />
COMPRESSORS<br />
Junior II, Yachting<br />
3.3.6 Changing the 3rd Stage Valves<br />
On this valve head, the valves are arranged on the upper and lower side due to the small diameter of the<br />
3rd Stage head. See Figure 3-8.<br />
Figure 3-8<br />
3rd Stage Valve Head<br />
7<br />
8<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
1. Torque Stud<br />
2. Valve Cover<br />
3. Pressure Valve<br />
4. O-ring<br />
5. Valve Head<br />
6. Intake Valve<br />
7. Allen Screw<br />
8. Washer<br />
^ CAUTION ^<br />
Always change the intake and pressure valves of the 3rd Stage at the same time.<br />
1. To remove or install the intake valve (6) use the special tool which is part of tool set delivered with<br />
the unit. (See Figure 3-16.)<br />
2. The pressure valve (3) is merely inserted into the valve head (5). It is sealed by the O-Ring (4) and<br />
fixed to the valve head by the torque stud (1).<br />
3. Remove pressure valve by loosening torque stud (1) a couple of turns.<br />
Page 19 1st Edition, Rev. 0 Chg 3
Change language