profiset 30 manual.pdf

Programming the telephone settings
T
S
Enter the call number for call forwarding.
Save the setting.
The call charges incurred in connection with call
forwarding (e.g. car telephone/mobil telephone)
are not displayed on the Profiset 30isdn nor registered
on the summation meter.
The caller only pays for the connection between
his or her phone and the initial destination; the
remainder of the connection must be paid for by
the party who has activated call forwarding.
Tariff unit factor
Before you switch on the charge meter, you should enter
the tariff unit factor, i.e. the costs calculated by your network
operator for each call charge unit.
a
S15
T
T
S
Handset is on-hook.
Start the programming procedure.
Enter the password if necessary.
Enter the tariff unit factor.
Save the setting.
Note:
Enter the number of three decimal places for
the tariff unit factor.
Activating/deactivating the display of charge/call time of the active call
If the display of charge/call time for the active (current) call
is activated, the display alternates between the call
number and the call charge (if incurred)/call time.
Enter 0 or 1 to deactivate or activate the display of charge:
● ”0“ Display of charge /call time of the active call is
deactivated
● ”1“ Display of charge /call time of the active call is
activated
In the as-supplied condition, the display of charge/call
time of the active call is activated.
a
S16
Handset is on-hook.
Start the programming procedure.
35