Fontmanager - Kodak

Chapter 3. Creating and modifying fonts
Creating new fonts
3. Enter a unique name for the font. Refer to section 1.4, “Font naming”,
for details.
4. Enter a number (required by Scitex printers) for the font. By default,
the first available number is shown in the Font Number edit box.
This number must not already be in use for the current resolution.
The number must be in the range 1000 to 1999 or 3000 to 4999.
Furthermore, the number must be a multiple of 4 (this is because the
numbers in between are used for the subfonts).
You should assign the same number to each resolution you create for
a font name.
Refer to section 1.4 1.4 for a discussion of font naming.
5. At this point, if you click OK or Cancel, the font is not saved. First
you have to click the Select New Font button.
When you click the Select New Font button, the font name and
number are reserved and can no longer be changed (they appear
grayed out).
The Font dialog appears.
Figure 3-2
Font dialog
3 - 2 Fontmanager