Download catalog - Saint-Tech

Structures System – Load Cells and Amplifiers
Choice of Load Cell Amplifiers:
CI.Load.Cell.Amplifier
CI-6464
Dual.Load.Cell.Amplifier
PS-2205
Load.Cell.Amplifier
(6.ports)
PS-2198
This amplifier allows users of the 500
and 750 ScienceWorkshop Interfaces to
collect data using the Structures System
100N and 5N Load Cells. This system has
been successfully used at sample rates
up to 10,000 Hz. The sample rate limit
is determined by the interface and
computer used.
A separate amplifier is required for
each load cell.
Order Information:
CI Load Cell Amplifier*................CI-6464
Required for Use:
ScienceWorkshop Interface....p..2
Load.Cell.100N*..................................PS-2200.
Load.Cell.5N*.......................................PS-2201.
Also available at a discount:
CI Load Cell and
Amplifier Set*..........................CI-6465
Set Includes:
CI.Load.Cell.Amplifier*..
(CI-6464)
Load.Cell.100N*..
(PS-2200)
Required for use:
ScienceWorkshop Interface.(p..2)
Two types of Load Cells:
The Amplifier accepts either the 100N load
cell or the 5N load cell or a combination
of both. The maximum data sample rate is
1000 Hz for each port.
A PASCO PASPORT USB interface is
required: Use a USBLink (PS-2100A) for
just one Load Cell Amplifier or use an
Xplorer GLX (PS-2002) or PowerLink
(PS-2001) for multiple Load Cell Amplifiers.
Order Information:
Dual Load Cell Amplifier*..........PS-2205
Required for Use:
PASPORT.Interface.........................p..4
Load.Cell.100N*..................................PS-2200.
Load.Cell.5N*.......................................PS-2201.
Also available at a discount:
Load Cell and
Dual Amplifier Set*.............PS-2206
Set Includes:
Dual.Load.Cell.Amplifier*..
(PS-2205)
Load.Cell.100N*..
(PS-2200)
Required for use:
PASPORT.Interface.(p..4)
Load cells are available in two different ranges: ±100 N and ± 5 N. These load cells are
designed to be inserted into structures without changing the length of the member. A load
cell attached to two shorter beams is equal in length to a longer beam. Both types of load
cells can be used with the same amplifier in any combination. The semi-transparent case
lets students see the strain gauge and beam inside.
This Load Cell Amplifier can accommodate
up to six load cells and only needs a single
USBLink (PS-2100A) to connect to the
USB port on a computer. This is useful for
doing an extensive analysis of a bridge by
inserting six load cells at various points
in the structure to see if theory matches
reality.
The Amplifier accepts either the 100N load
cell or the 5N load cell or a combination
of both. The maximum data sample rate is
500 Hz for each port.
Order Information:
Load Cell Amplifier*
(6 ports).................................................PS-2198
Required for Use:
PASPORT.Interface......................p..4
Load.Cell.100N*...............................PS-2200.
Load.Cell.5N*....................................PS-2201.
Also available at a discount:
Load Cell and
Amplifier Set*..........................PS-2199
Set Includes:
Load.Cell.Amplifier*..
(PS-2198)
Load.Cell.100N*..
(qty.4).(PS-2200)
Required for use:
PASPORT..
Interface.(p..4)
Load Cell 5N
(PS-2201)
Load.Cell.
100N
PS-2200
Load.Cell.5N
PS-2201
Specifications
Range: -100 N to +100 N
Accuracy: ±1% (± 1 N)
Resolution: 0.02 N
Safe Overload: -150 N to +150 N
Specifications
Range: -5 N to +5 N
Accuracy: ±1% (±0.05 N)
Resolution: 0.001 N
Safe Overload: -7.5 N to +7.5 N
2 1/4”
Load Cell 100N
(PS-2200)
Order Information:
100 N Load Cell*...............PS-2200
Order Information:
5 N Load Cell*....................PS-2201
www.pasco.com/engineering
Mix 5N and 100N load cells on the same amplifier
*Patents pending
9