Download catalog - Saint-Tech

Temperature.Array
PS-2157
This array has eight 3.5 mm stereo jacks
to plug in temperature probes. Only one
PASPORT Channel is required to measure
eight temperatures at once! Applications
include measuring temperatures along the
length of a metal rod as one end is heated
or measuring surface temperature at eight
different points on a body. The Temperature
Array also has a “multiport” for plugging in
a special cable (included) with eight colorcoded
thermistor sensors connected to a
single 8-pin mini-DIN plug. The Temperature
Array accepts PASPORT temperature
probes: Stainless Steel, Fast Response and
Skin/Surface.
Specifications
Range: -35 °C to 135 °C*
Accuracy: ±0.5 °C
Resolution: 0.0025 °C
Repeatability: 0.01 °C
Maximum Sample Rate: 100 Hz per Temperature
Sensor
Displays: °C, K and °F
* Sensor Dependent
Includes
Temperature Array Cable Assembly
Fast Response Temperature Probe (3)
Adhesive Patches (10)
See page 73 for more applications.
Order Information:
Temperature Array...........................PS-2157
Recommended:
Stainless.Steel.
Temperature.Probe.........................PS-2153. .
Fast.Response.
Temperature.Probe..........................PS-2135. .
Skin/Surface.
Temperature.Probe..........................PS-2131. .
Replacement..
Temperature.Array.Cable............PS-2552. .
Replacement.Adhesive.
Patches.(100.Pack)..........................PS-2525. .
Temperature Sensors
Absolute.Pressure/.
Temperature
PS-2146
This combination sensor is specifically
designed for use in studying gas laws. The
included thermistor temperature probe has
both a fast response and very low thermal
mass.
Typical Applications
Extrapolate absolute zero
Explore Gas Laws (Ideal, Charles’, Boyle’s)
Specifications
Pressure: 0 to 700 kPa with ±2 kPa accuracy, 0.1 kPa
resolution and 1 kPa repeatability (Displays pressure
in kPa, N/m2, and psi)
Maximum Sample Rate: 100 Hz
Temperature with included Fast Response
Probe: -30 to 105 °C with ±0.5 °C accuracy (Displays
Temperature in °C, K and °F)
Sensor Extension Cable: Included
Extrapolating
Absolute Zero
Measure pressure
and temperature
of air in the
sphere.
See pages 68 & 69 for more applications.
Order Information:
Absolute Pressure/
Temp Sensor............................................PS-2146
Recommended:
Absolute.Zero.Sphere......................TD-8595.
Ideal.Gas.Law.Syringe.....................TD-8596A.
www.pasco.com/engineering
Temperature.(Type.K)
PS-2134
The PS-2134 is a single
channel sensor that uses
the same Type K thermocouple
probe as the PS-2127 shown
below. Includes one Type K
Thermocouple.
Specifications
Temperature Range: -200 °C to +1000 °C
Maximum Sample Rate: 10 Hz
Accuracy: ±3 ºC or 3%, whichever is greater
Order Information:
Temperature Type K Sensor..............PS-2134
Replacement Supply:
Type.K.Thermocouple............................PS-2155.
Temperature.(Type.K.4-Port)
PS-2127
The PS-2127 measures up to four temperatures
using Type K thermocouple probes
(two included). It utilizes dynamic variable
oversampling to greatly reduce noise at
lower sampling rates.
Typical Applications
Accurately measure surface temperatures:
for example, across the surface of an iron
Map the temperature of a candle flame
Measure temperatures down to -200 °C
(liquid nitrogen)
Includes
4-Port Sensor
Type K Thermocouples (2)
Specifications
Temperature Range: -200 °C to +1000 °C
Maximum Sample Rate: 250 Hz
Accuracy: ±3 ºC or 3%, whichever is greater
Resolution: 0.01 °C
Displays: °C, K and °F
Order Information:
Temperature
(Type K 4-Port) Sensor.....................PS-2127
Replacement Supply:
Type.K.Thermocouple.......................PS-2155.
71