Download catalog - Saint-Tech

Lab Supplies
Large Rod Base
ME-8735
P Stable 4 kg Casting
P Leveling Feet
P Supports
25 cm
Two Rods
Two Rod Mounts
9 to 12 mm dia.
(3/8” to 1/2”)
Special
Three Point
Design
Inside
mounting
hole assures
stability.
Stainless Steel Rods
ME-8741
120 cm Long
ME-8738
90 cm Long
Leveling
Feet
Certain experimental setups require extra stability.
The PASCO ME-8735 is designed for just such
experiments. This sturdy 4 kg cast-iron base
provides stability that just can’t be achieved
any other way than with a large mass. The
A-frame design provides a wide base to
support one or two rods. Rods from
9.5 to 13 mm (3/8 to 1/2 inches) can
be supported. (See below). The rod
mounting holes have a special threepoint
contact design to assure stability.
Two adjustable feet provide the
necessary leveling capabilities.
Order Information:
Large Rod Base .......................................................................................ME-8735
Small “A” Base
ME-8976
26 cm
19 cm
This 1.7 kg cast iron base is
smaller than the Large Rod Base
(ME-8735) and does not have
leveling feet. This base can be
used with both threaded and nonthreaded
rods. Non-threaded rods from
9.5 to 13 mm (3/8 to 1/2 inches) diameter
19 cm
can be supported. Threaded rods must be
12.7 mm (1/2 inch) in diameter with 1/2”-13
thread, such as ME-8977 shown at right.
Steel
Rods
ME-8988
25 cm
Long
Threaded Rod
ME-8977
60 cm
Long
Threaded Rod
ME-8736
45 cm
Long
Order Information:
Small A Base .............................................................................................ME-8976
Small Round Base (2 pack)
ME-8974A
Great for those times when you just
need a small support with a low profile,
this 525 g cast iron base is 12.5 cm
in diameter and has a 1/2”-13 threaded
hole to accept threaded rods, such as
ME-8988 or ME-8977 (shown at right).
Order Information:
Small Round Base (2 pack) ............................................................ME-8974A
These 12.7 mm (1/2 in.) diameter stainless steel rods do not mar
like aluminum rods. They are non-magnetic, very rigid, and durable.
Three different lengths are available in the non-threaded version. The
60 cm long rod and 25 cm long rod are threaded (1/2”-13) and fit
the small A-Base ME-8976, the small round base ME-8974 and the
ME-9376B Universal Table Clamp.
Order Information:
Stainless Steel Rods (bases not included) 12.7 mm (1/2 in.) in diameter:
45 cm Long (non-threaded).............................................................ME-8736
90 cm Long (non-threaded).............................................................ME-8738
120 cm Long (non-threaded).........................................................ME-8741
25 cm Long (threaded)........................................................................ME-8988
60 cm Long (threaded)........................................................................ME-8977
www.pasco.com/engineering
109