06.11.2014 Views

PRIMERGY RX300 S3

PRIMERGY RX300 S3

PRIMERGY RX300 S3

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

System configurator and order-information guide<br />

Start <strong>PRIMERGY</strong> <strong>RX300</strong> <strong>S3</strong> <strong>PRIMERGY</strong> <strong>RX300</strong> <strong>S3</strong> Status 2006-04-24<br />

Section I Basic unit<br />

System unit consisting of:<br />

* 2U Housing including one power supply module<br />

- hot plug Power supply unit with 1 PSU module and power cord rack 4m lenght<br />

(can be upgraded with one additional PSU module)<br />

* Fan unit with 4 hot plug system-fans and control logic for 8 fans<br />

- Additional 4 hot plug system-fans as a redundant fans option (option)<br />

* SAS Backplane for 6x 3.5" HD with cable-less connection to motherboard<br />

* The basic units are offered with 1GB, 2GB or 4GB Memory as default.<br />

* Drives/Bays<br />

- 6 bays 1" for hot plug 3.5" HD (1" high)<br />

- 1 bay for 3.5" and 1.6" high Backup device, consumes 2 bays 1" for hot plug HD<br />

- 1 bay IDE-CD- or DVD-ROM 0,5" height (option)<br />

- 1 bay for opt. LocalView LC-Display or floppy disk 1.44MB, 0,5" height<br />

* Integrated ServerView Diagnostics Technology for indication of internal failed components<br />

Mounting kit for <strong>RX300</strong> <strong>S3</strong> is part of the basic unit<br />

- 1 pair of telescopic rails<br />

- 1 Vario carrier DC-PC-3rd party Rack<br />

allows toolless adjustable in depth and easy mounting<br />

Mounting kit for mounting of servers in FSC 19" PRIMECENTER- racks<br />

and all server racks conforming to EIA standard EIA-310-D for 19" racks.<br />

Therefore the mounting kit is variable in depth from 704-900mm<br />

Systemboard with:<br />

* One CPU including a passive heat sink according to the configurator<br />

Xeon Dual Core CPU supporting 64Bit EM64T and Intel® VT / HT / DBS Technology.<br />

- ( VT =Virtualisation Technology, HT = Hyper Threading, DBS = Demand Based Switching )<br />

* Chipset Intel® 5000P (codenamed Blackford)<br />

* 5 PCI slots: 1x PCIe x8 low profile<br />

2x PCIe x4 low profile ( mechanical x8 ), hot plug PCI<br />

2x PCI-X 64Bit/133MHz low profile (3.3V)<br />

- 3 PCI Slots (Standard full height PCI System - with PCI Subchassis (risercard option))<br />

1x PCI-X 64Bit/133MHz long full height<br />

2x PCI-X 64Bit/133MHz short full height<br />

* 8 memory slots for max. 32GB RAM ( Fully Buffered DIMM = FBD533 / PC2-4200F ) available<br />

- Memory is divided into two branches, driven by a memory controller each.<br />

- Each branch has 2 channels with 2 DIMM slots each (bank 1 and bank 2)<br />

- Max. 4GB modules per slot are possible<br />

- Memory upgrade is possible per branch with modul pairs ( one pair / branch )<br />

- Memory mirrroring is supported branch to branch for 2 identical module pairs each in the same<br />

same memory bank of branch 0 and branch 1<br />

- Max. memory bandwidth and 4-way interleaving is supported with 2 identical memory pairs<br />

in one memory bank (one pair per branch) if mirroring is disabled<br />

- Chipkill is supported for memory modules,<br />

* One Fast-IDE (ATA) channel on-board for 1x DVD integrated in the<br />

Intel Southbridge ESB2-V<br />

* 8-port SAS controller on-board including IME (Integrated Mirroring Enhanced) offering<br />

the RAID level 1 without any additional costs.<br />

* RAID5 Intel® IOP332 I/O Processor ( codenamed Brockton ) on-board which uses the on-board<br />

LSI 1068 8-port SAS controller and which is enabled via an Upgrade Kit<br />

"SAS MegaRaid PCI Express ROMB". This kit contains a 256MB RAID cache memory<br />

( optional also 256MB with BBU ) and a so called iButton enable key.<br />

* Dual channel Gbit Ethernet LAN BroadCom 5715 on-board<br />

* Graphics controller integrated in iRMC (integrated Remote Management Controller)<br />

Resolution: 1280 x 1024 at 8bpp or 1024 x 768 at 16 bpp, 85Hz, VESA compatible<br />

* iRMC (integrated Remote Management Controller) onboard server management<br />

and graphics controller. Resolution: 1280 x 1024 at 8bpp or 1024 x 768 at 16 bpp<br />

External Interfaces:<br />

* 1x RS-232-C (serial, 9pin) (usable for BMC or OS or shared)<br />

* 1x optional RS-232-C (serial, 9-pin) - occupies PCI-slot 1!<br />

* 1x optional Centronics (parallel, 25 pin, EPP/ECP compatible) - occupies PCI-slot 5!<br />

* 1x keyboard (PS/2)<br />

* 1x mouse (PS/2)<br />

* 1x VGA (15 pin)<br />

* 4x USB 2.0 ( UHCI ) with 480MBit/s (2x external at the rear, 2x external at the frontside, no USB wakeup)<br />

* 2x LAN RJ45<br />

Cables:<br />

1. IDE cable for CD/DVD and floppy cable.<br />

2. Power cable<br />

Software:<br />

* ServerStart packet incl. ServerBooks CD, ServerSupport CD and ServerView<br />

* Documentation engl. (multilingual on CD)<br />

A<br />

Fujitsu Siemens Computers<br />

Enterprise Products <strong>PRIMERGY</strong> Server 6 of 21

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!