PRIMERGY RX300 S3

System configurator and order-information guide
B PRIMERGY RX300 S3 Status 2006-04-24
PRIMERGY 19" Rack
PRIMERGY PRIMECENTER-Rack
"Rack-mounting ex factory"
SNP:SY-F1647E301-P
This service is to be ordered once
Installation ex works for one
per installable server/storage
server or subsystem.
subsystem, in order to get the
Hereby the rack will be delivered
server/storage subsystem
completely pre-mounted and
mounted into the PRIMERGY racks.
all wired connections are tested Important notice ! In case of the 46 U PRIMERGY rack,
With racks 12U, 24U, 38U: The mounting kit for PRIMERGY RX300 S3 this service has to be ordered,
Systems and components is included the basic version and to get the mounting kits and the
will be delivered installed in the rack will be delivered with every RX300 S3 cables installed.
With racks 46U:
Systems and components
will be delivered separately PRIMERGY 42/23U rack
To be ordered only together with PRIMERGY Classic 19" rack is not supported
a
PRIMERGY-
PRIMECENTER
rack
e . g . :
S26361-K826-V10x
refer configurator PC-rack
max. 1x per system
Section II Processor
There are 2 processor sockets available.
A dual-processor system requires a multi-processor operating system.
Later upgrading to a dual-processor system is also possible.
For a CPU extension the second CPU must be of identical type and clock rate.
S26361-F3312-E300 S26361-F3312-E320 S26361-F3312-E373
64-bit Intel Xeon 5050 64-bit Intel Xeon 5060 64-bit Intel Xeon 5080
3.00GHz/667MHzFSB 3.20GHz/1066MHzFSB 3.73GHz/1066MHzFSB
with 2x 2 MB SLC on Chip with 2x 2 MB SLC on Chip with 2x 2 MB SLC on Chip
(SLC=Second Level Cache) (SLC=Second Level Cache) (SLC=Second Level Cache)
and passive heat sink and passive heat sink and passive heat sink
occupies socket for one CPU occupies socket for one CPU occupies socket for one CPU
max. 1x per system max. 1x per system max. 1x per system
C
Fujitsu Siemens Computers
Enterprise Products PRIMERGY Server 8 of 21