ITA Technical Catalogue

Technical catalogue ITA magnetically controlled liquid level indicator Intra-Automation
Order codes for magnetic level gauge type ITA-12 and ITA-12.0 (Continuation)
Code
Description
11.2 Vent flange with concentric reducer (X-ray testing)
0 without
1 DN 15 PN 250
2 DN 25 PN 250
3 DN 32 PN 250
4 DN 40 PN 250
A 1/2" ANSI 1500 lbs
B 3/4" ANSI 1500 lbs
C 1" ANSI 1500 lbs
D 1 1/4" ANSI 1500 lbs
E 1 1/2" ANSI 1500 lbs
11.3 Surface vent flange welded to end cap (only DN50 or 2")
0 without
B Standard-Surface RF
D Surface Form E Rz=16
E Surface RFSF (smooth finished)
G Surface groove large
K Surface tongue-large
L Surface RTJ (ANSI)
12. Counter flanges
0 without
1 DN 15 PN 250
2 DN 25 PN 250
3 DN 32 PN 250
4 DN 40 PN 250
5 DN 50 PN 250
A 1/2" ANSI 1500 lbs
B 3/4" ANSI 1500 lbs
C 1" ANSI 1500 lbs
D 1 1/4" ANSI 1500 lbs
E 1 1/2" ANSI 1500 lbs
F 2" ANSI 1500 lbs
12.1 Surface counter flanges
0 without
B Standard-Surface RF
D Surface Form E Rz=16
E Surface RFSF (smooth finished)
G Surface groove large
K Surface tongue-large
L Surface RTJ (ANSI)
12.2 Bolts & Nuts counter flanges
0 without
1 M24 x 140 mm; mat. CK35/C35 zinced DIN2510; Flange DN 50 PN 250
2 M24 x 140 mm; mat. A2-70 DIN2510; Flange DN 50 PN 250
A 7/8" x 150 mm; mat. A193B7 / A1942H zinced; Flange 2" ANSI 1500 lbs RF/RTJ
B 7/8" x 150 mm; mat. A193B7 / A1942H PTFE coated; Flange 2" ANSI 1500 lbs RF/RTJ
C 7/8" x 150 mm; mat. A193B8 / A1948M stainless steel; Flange 2" ANSI 1500 lbs RF/RTJ
- 151 -