ITA Technical Catalogue

Intra-Automation ITA magnetically controlled liquid level indicator Technical catalogue
Order codes for magnetic level gauge type ITA-3 and ITA-3.0 (Continuation)
Code
Description
11.3 Surface vent flange welded to end cap (only DN50 or 2")
0 without (Vent flange welded to end cap = without)
A Standard- Surface Form C
B Standard-Surface RF
C Surface Form D Rz=40
D Surface Form E Rz=16
E Surface RFSF (smooth finished)
F Surface groove (DIN2512)
G Surface groove large
H Surface tongue (DIN2512)
K Surface tongue-large
L Surface RTJ (ANSI) 1/2" bis 2"
12. Counter flanges
0 without
1 DN 15 PN 16
2 DN 20 PN 16
3 DN 25 PN 16
4 DN 32 PN 16
5 DN 40 PN 16
6 DN 50 PN 16
A 1/2" 150 lbs
B 3/4" 150 lbs
C 1" 150 lbs
D 1 1/4" 150 lbs
E 1 1/2" 150 lbs
F 2" 150 lbs
12.1 Surface counter flanges
0 without (Counter flanges = without)
A Standard- Surface Form C
B Standard-Surface RF
C Surface Form D Rz=40
D Surface Form E Rz=16
E Surface RFSF (smooth finished)
F Surface groove (DIN2512)
G Surface groove large
H Surface tongue (DIN2512)
K Surface tongue-large
L Surface RTJ (ANSI) 1/2" bis 2"
12.2 Bolts & Nuts counter flanges
0 without (Counter flanges = without)
1 M16 x 65 mm; mat. zinced steel; flange DN 32 PN 16
2 M16 x 65 mm; mat. stainless steel 1.4301; flange DN 32 PN 16
3 M16 x 65 mm; mat. zinced steel; flange DN 50 PN 16
4 M16 x 65 mm; mat. stainless steel 1.4301; flange DN 50 PN 16
A 5/8" x 83; mat. zinced steel A193B7; flange 2" ANSI 150 lbs
B 5/8" x 83; mat. stainless steel A193B8 A1948M; flange 2" ANSI 150 lbs
Z Bolts & nuts PTFE coated (only DN 50 or 2")
- 16 -