ITA Technical Catalogue

Technical catalogue ITA magnetically controlled liquid level indicator Intra-Automation
Order codes for magnetic level gauge type ITA-3 and ITA-3.0 (Continuation)
Code
Description
10.2 Bolts & nuts float pipe top end finish flange (only DN50 or 2")
0 without (Float removal flange (bottom side) = end cap)
1 M16 x 65 mm; mat. zinced steel; flange DN 32 PN 16
2 M16 x 65 mm; mat. stainless steel 1.4301; flange DN 32 PN 16
3 M16 x 65 mm; mat. zinced steel; flange DN 50 PN 16
4 M16 x 65 mm; mat. stainless steel 1.4301; flange DN 50 PN 16
A 5/8" x 83; mat. zinced steel A193B7; fange 2" ANSI 150 lbs
B 5/8" x 83; mat. stainless steel A193B8 A1948M; flange 2" ANSI 150 lbs
C Bolts & nuts PTFE coated (only DN 50 or 2")
11. Vent plug at top end
0 without
1 Vent plug G 1/2" with soft iron gasket
2 Vent plug 1/2" NPT
3 Vent plug 3/4" NPT
4 Vent plug 1" NPT
11.1 Vent flange welded to end cap instead of vent plug
0 without
1 Flanged DN 15 PN 16 (socket weld construction to endcap)
2 Flanged DN 20 PN 16 (socket weld construction to endcap)
3 Flanged DN 25 PN 16 (socket weld construction to endcap)
4 Flanged DN 32 PN 16 (socket weld construction to endcap)
5 Flanged DN 40 PN 16 (socket weld construction to endcap)
6 Flanged DN 50 PN 16 (socket weld construction to endcap)
A Flanged 1/2" ANSI 150 lbs (socket weld construction to endcap)
B Flanged 3/4" ANSI 150 lbs (socket weld construction to endcap)
C Flanged 1" ANSI 150 lbs (socket weld construction to endcap)
D Flanged 1 1/4" ANSI 150 lbs (socket weld construction to endcap)
E Flanged 1 1/2" ANSI 150 lbs (socket weld construction to endcap)
11.2 Vent flange with concentric reducer (X-ray testing)
0 without
1 DN 15 PN 16
2 DN 20 PN 16
3 DN 25 PN 16
4 DN 32 PN 16
5 DN 40 PN 16
A 1/2" ANSI 150 lbs
B 3/4" ANSI 150 lbs
C 1" ANSI 150 lbs
D 1 1/4" ANSI 150 lbs
E 1 1/2" ANSI 150 lbs
- 15 -