ITA Technical Catalogue

Technical catalogue ITA magnetically controlled liquid level indicator Intra-Automation
Order codes for magnetic level gauge type ITA-3 CR64 and ITA-3.0 CR64 (Cont.)
Code
Description
10.1 Surface open drain flange
0 without (Float removal flange (bottom side) = end cap or < DN50 or 2")
A Standard- Surface Form C
B Standard-Surface RF
C Surface Form D Rz=40
D Surface Form E Rz=16
E Surface RFSF (smooth finished)
F Surface groove (DIN2512)
G Surface groove large
H Surface tongue (DIN2512)
K Surface tongue-large
L Surface RTJ (ANSI) 1/2" bis 2"
11. Float pipe top end finish
1 End cap
2 Flange with blind flange DN 32 PN 16
3 Flange with blind flange DN 50 PN 16
A Flange with blind flange 2" ANSI 150 lbs
11.1 Surface float pipe top end finish flange (only DN50 or 2")
0 without (Float removal flange (bottom side) = end cap or < DN50 or 2")
A Standard- Surface Form C
B Standard-Surface RF
C Surface Form D Rz=40
D Surface Form E Rz=16
E Surface RFSF (smooth finished)
F Surface groove (DIN2512)
G Surface groove large
H Surface tongue (DIN2512)
K Surface tongue-large
L Surface RTJ (ANSI) 1/2" bis 2"
11.2 Bolts & nuts float pipe top end finish flange (only DN50 or 2")
0 without (Float removal flange (bottom side) = end cap)
1 M16 x 65 mm; mat. zinced steel; flange DN 32 PN 16
2 M16 x 65 mm; mat. stainless steel 1.4301; flange DN 32 PN 16
3 M16 x 65 mm; mat. zinced steel; flange DN 50 PN 16
4 M16 x 65 mm; mat. stainless steel 1.4301; flange DN 50 PN 16
A 5/8" x 83; mat. zinced steel A193B7; fange 2" ANSI 150 lbs
B 5/8" x 83; mat. stainless steel A193B8 A1948M; flange 2" ANSI 150 lbs
C Bolts & nuts PTFE coated (only DN 50 or 2")
12. Vent plug at top end
0 without
1 Vent plug G 1/2" with soft iron gasket
2 Vent plug 1/2" NPT
3 Vent plug 3/4" NPT
4 Vent plug 1" NPT
- 33 -