ITA Technical Catalogue

Intra-Automation ITA magnetically controlled liquid level indicator Technical catalogue
Order codes for magnetic level gauge type ITA-3 CR64 and ITA-3.0 CR64 (Cont.)
Code
Description
8.1 Surface float removal flange (bottom side) (only DN50 or 2")
0 without (Float removal flange (bottom side) = end cap or < DN50 or 2")
A Standard- Surface Form C
B Standard-Surface RF
C Surface Form D Rz=40
D Surface Form E Rz=16
E Surface RFSF (smooth finished)
F Surface groove (DIN2512)
G Surface groove large
H Surface tongue (DIN2512)
K Surface tongue-large
L Surface RTJ (ANSI) 1/2" bis 2"
8.2 Bolts & nuts float removal flange (bottom side)
0 without (Float removal flange (bottom side) = end cap)
1 M16 x 65 mm; mat. zinced steel; flange DN 32 PN 16
2 M16 x 65 mm; mat. stainless steel 1.4301; flange DN 32 PN 16
3 M16 x 65 mm; mat. zinced steel; flange DN 50 PN 16
4 M16 x 65 mm; mat. stainless steel 1.4301; flange DN 50 PN 16
A 5/8" x 83; mat. zinced steel A193B7; fange 2" ANSI 150 lbs
B 5/8" x 83; mat. stainless steel A193B8 A1948M; flange 2" ANSI 150 lbs
C Bolts & nuts PTFE coated (only DN 50 or 2")
9. Drain plug
0 without
1 Drain plug G 1/2" with soft iron gasket
2 Drain plug 1/2" NPT
3 Drain plug 3/4" NPT
4 Drain plug 1" NPT
10. Additional drain flange, open
0 without
1 Drain stud with flange DN 15 PN 16
2 Drain stud with flange DN 20 PN 16
3 Drain stud with flange DN 25 PN 16
4 Drain stud with flange DN 32 PN 16
5 Drain stud with flange DN 40 PN 16
6 Drain stud with flange DN 50 PN 16
A Drain stud with flange 1/2" ANSI 150 lbs
B Drain stud with flange 3/4" ANSI 150 lbs
C Drain stud with flange 1" ANSI 150 lbs
D Drain stud with flange 1 1/4" ANSI 150 lbs
E Drain stud with flange 1 1/2" ANSI 150 lbs
F Drain stud with flange 2" ANSI 150 lbs
- 32 -