TANDBERG Edge 95-85-75 MXP User Manual (F5).pdf - Expoficina

General Use
Normal Output format is optimized for Normal VGA monitors (4:3)
Wide Output format is optimized for Wide VGA monitors (16:9)
Wide screen VGA or TV monitor in Normal (stretched) mode.
Wide screen VGA or TV monitor In Wide (native) mode.
VGA Out Mode
VGA Out Mode makes it possible to specify which signal to send to the VGA/DVI output.
Main
Dual
Should be used if you want to use a VGA monitor as your main monitor.
Should be used if you want to use a VGA monitor as your dual monitor.
VGA Out Quality
The supported range of VGA formats will be optimized for the VGA display monitor based on the
source image.
VGA Out Quality enables the user to change the preferred format for the DVI/VGA output. It is
recommended to keep this setting in Auto unless your screen doesn’t support some of the XGA
or SVGA formats the system is using. Note that the VGA Out port support VESA Power
Management.
Auto
VGA output format will be optimized dependant of the video source format,
refresh and of the EDID information available.
Supported formats are:
SVGA (800x600) 75Hz
XGA (1024x768) 60Hz / 75Hz
123