TANDBERG Edge 95-85-75 MXP User Manual (F5).pdf - Expoficina

TANDBERG Edge 75/85/95 MXP
3.9.1 Call Log
The Call Log lists Placed Calls, Missed Calls and Received Calls. That allows the user to see
which calls that are made in the past. The lists contain a maximum of 30 numbers and the
numbers are stored in these lists until the system is restarted. If the contacts listed are available
in the phone book, the names will be displayed instead of the numbers.
Placed Calls lists all outgoing calls, Missed Calls lists the calls that are not accepted and
Received Calls lists all incoming calls. The calls in the lists are marked with these icons:
outgoing calls
incoming calls
missed calls
The following buttons are available from these folders :
• Call Now
• Copy to My Contacts
• Delete
• Delete All
• Cancel
How to make a call using the call lists:
1. Select a number from the list.
2. Press the green Call button on the remote control, or press the left arrow key to select the
Call Now icon, followed by OK. The call will be set up as a video call or a telephone call
depending on the selected contact. Alternatively, press the OK button when the contact is
selected. The Make a Call menu will then be displayed with the name of the contact in
the Dial Number field, and the Call Settings field will reflect the call settings for this
contact. It is possible to alter the call settings before placing the call. The call will be set
up as a video call or a telephone call as described in Make a Call.
3. Wait for the call to connect.
How to delete numbers in the call lists do one of the following:
• Choose the Delete button to delete a selected contact from the call list.
• Choose the Delete All button to delete all contacts listed in the call list.
Note that you will not delete contacts from the Phone Book if you delete them from the call lists.
52