TANDBERG Edge 95-85-75 MXP User Manual (F5).pdf - Expoficina

TANDBERG Edge 75/85/95 MXP
• w448p will be used from a wide format (HD720p) input
• VGA/SVGA/XGA from PC, Digital Clarity
Sharpness*:
Improved quality of detailed images and graphics, lower frame rate, ideal for enhancing quality at
lower bandwidths.
• 4CIF will be used from a PAL video input, Digital Clarity
• 4SIF from NTSC, Digital Clarity
• w720p will be used from a wide format (HD720p) input
• VGA/SVGA/XGA from PC, Digital Clarity
IVM Resolution
The following table shows relationship between Transmission modes selected by the system
when Motion or Sharpness is set in the Call Quality menu. IVM will use this table to optimize the
Video quality, according to the capabilities of the remote system(s):
Basic Video Video Input Transmission mode selection rules*
Quality
MOTION PAL 448p -> iCIF@50 -> CIF -> QCIF
MOTION NTSC 400p -> 448p -> iSIF@60 -> iCIF@60 ->
SIF -> CIF -> QCIF
MOTION VGA 448p -> CIF -> QCIF
MOTION SVGA 448p -> CIF -> QCIF
MOTION XGA 448p -> CIF -> QCIF
MOTION Wide w448p -> w288p -> CIF -> QCIF
SHARPNESS PAL 4CIF -> VGA -> CIF -> QCIF
SHARPNESS NTSC 4SIF -> 4CIF -> VGA -> SIF -> CIF -> QCIF
SHARPNESS VGA VGA -> 4CIF -> CIF -> QCIF
SHARPNESS SVGA SVGA -> XGA -> 4CIF -> VGA -> CIF ->
QCIF
SHARPNESS XGA XGA -> SVGA -> 4CIF -> VGA -> CIF ->
QCIF
SHARPNESS Wide w720p -> w576p -> w448p -> w288p -> CIF
-> QCIF
Transmission mode with Motion or Sharpness selections.
160