LP 1.6 Series - Kilotech

48
4.8 INIT (Initialize PLU and MSG data)
You can initialize all PLU’s data , MESSAGE data or ALL data.
How to clear memory
1) To go to PROGRAM mode, press 10000 by using numeric keys and VOID key.
2) Press key six times.
3) The WEIGHT display shows “init”.
4) Press PRT/* key and the display shows “init ALL”. If you want to clear all PLU data and
message data, press the PRT/* key. If you want to clear PLU or MESSAGE, press key or
key to select PLU or MSG and press PRT/* key to clear it.
5) If you wish to finish PROGRAM mode, press C key.
4.9 Password
Password can be from 1000 to 999999 but you have to set the numbers of four digits. If you
set it to 0, there is no password. Once you set password, you have to enter it to go to program
mode.
How to program password
1) To go to PROGRAM mode, press 10000 by using numeric keys and VOID key.
2) Press key seven times.
3) The WEIGHT display shows “PASS”.
4) Press PRT/* key and the display shows “PASS ------”.
5) Type your password. (Password can be from 1000 to 999999 but you have to set the
numbers of four digits. If you set it to 0, there is no use of password.)
6) Press PRT/* key. The display shows “PASS”
7) If you wish to finish PROGRAM mode, press C key.
49