TCP/IP Converter DDS EX-9132 Operation Manual for 8051 Series

More documents

Recommendations

Info

LED Indicators PWR (Green) Power indicator (When the power is on, the LED will be on.) DATA (Red) Data sent & received indicator (When data are sending and receiving to the network, the LED will blink.) 10/100 (Green) Network signal indicator, when the LAN signal is detected and then, the LED will be on. LAN (Red) Device statues indicator (When EX-9132 TCP/IP converter is operated in normal statues, the LED will blink once per second.) 13
Wiring Architecture RS-232 Wiring Architecture RS-422/RS-485 Wiring Architecture 14
Page 1 and 2: TCP/IP Converter DDS EX-9132 Operat
Page 3 and 4: Controller Setup ………………
Page 5 and 6: Overview TCP/IP converters are desi
Page 7 and 8: Block Diagram Low-cost devices usua
Page 9 and 10: Product Specifications • CPU : 8-
Page 11 and 12: Converter Description & Installatio
Page 13: Reset Button If by any chance, you
Page 17 and 18: 3 Converter Configuration Initial I
Page 19 and 20: Refresh Refresh the status. ExpertD
Page 21 and 22: Web Console Configuration In additi
Page 23 and 24: Field Description □ System time e
Page 25 and 26: □ Field Description □ IP Addres
Page 27 and 28: □ Socket port of Digital I/O □
Page 29 and 30: □ Setup password Administration p
Page 31 and 32: Factory Default Setting If by chanc
Page 33 and 34: Hyper Terminal for TCP/IP WinSock I
Page 35 and 36: After “OK” button is pressed, F
Page 37 and 38: Data Transmission When all steps de
Page 39 and 40: Appendix B Pin outs and Cable Wirin

TCP/IP Converter DDS EX-9132 Operation Manual for 8051 Series

Create successful ePaper yourself

Delete template?

Save as template?