Download User Instruction (3MB PDF) - Leckey

7.2 Removable
Backrest spine
7.3 Fixed Backrest
spine
7.4 Seat Base
Cushion
The removable backrest spine will be
detached for shipping. Insert it into the side
plates of the seat base, slipping the front pin
(A) into the front slot (B) on both sides of the
seat base. Angle the spine back. Place the
pin (C) through the base of the spine.
If the fixed backrest spine option has been
ordered, simply rotate the backrest into the
vertical position and insert pin (A) through the
base of the spine.
Fasten the two poppers (A) at the back of the
seatbase. Press the cushion down onto the
Velcro which is on the leg support ramps.
Loop the elastic over the hooks (B) on the
side of the seatbase.
A
B
A
B
A
C
A
B