Download User Instruction (3MB PDF) - Leckey
Download User Instruction (3MB PDF) - Leckey
Download User Instruction (3MB PDF) - Leckey
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
A<br />
7.15 Headrest<br />
7.16 Femoral Gables 7.17 Foot Supports<br />
To attach the head support (<strong>Leckey</strong> or<br />
Otto Bock) slide the stem into the receiving<br />
bracket (A) and secure by tightening the<br />
screw (B).<br />
The KIT Seating System has been designed<br />
to interface with Whitmyer head supports and<br />
a range of other supports that require a box<br />
section receiving bracket. Insert the Whitmyer<br />
interface bracket box section into the top<br />
of the spine. Secure the head support onto<br />
this bracket.<br />
Femoral gables are attached to the seat base<br />
using bolts (A). There are two bolts for each<br />
gable. Bolts should be firmly secured.<br />
Loosen the leg support nuts (A) on the<br />
underside of the seat base with a spanner.<br />
Move the leg supports forward one at a<br />
time. This makes it easier to insert the foot<br />
supports. Open the screws (B) and slide in<br />
the foot supports from the centre. Retighten<br />
the screws. Reposition the leg supports and<br />
retighten nuts.<br />
Always make sure the foot supports are<br />
attached securely.<br />
Whitmyer bracket<br />
A<br />
Box section bracket<br />
B<br />
A<br />
A<br />
B