Dell Online Rack UPS (3750W and 4200W) User's Guide - E-pood
Dell Online Rack UPS (3750W and 4200W) User's Guide - E-pood
Dell Online Rack UPS (3750W and 4200W) User's Guide - E-pood
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Table 4 describes the available battery status screens. Only one battery status is available at a time.<br />
Table 4. Battery Status Screens<br />
Battery Status Screen<br />
Battery charging<br />
Battery floating<br />
Battery resting<br />
Battery discharging<br />
Battery disconnected<br />
Charger disabled<br />
Description<br />
Batteries are charged in constant current mode.<br />
Batteries are charged in constant voltage mode.<br />
Batteries are connected but are not being charged or discharged.<br />
(This is part of the normal charging cycle.)<br />
Batteries are discharging.<br />
Batteries are unavailable because they are disconnected.<br />
The battery charger is off. You can enable the Charger setting from the Settings<br />
menu (see page 45).<br />
Event Log<br />
The Event Log holds up to 50 events. You can scroll through the event screens, beginning with the most<br />
recent event.<br />
NOTE: The date format is dependent on the language selection.<br />
The first row of each event screen contains the date (MM/DD/YYYY) <strong>and</strong> time (hh:mm:ss) at which the<br />
event occurred. The second row contains the type of event <strong>and</strong> code. The event description begins on<br />
the third row <strong>and</strong> may continue to the fourth row. The bottom right corner of the event screen displays<br />
two numbers: an ordering number of the event in the log, followed by the total number of events in the<br />
log.<br />
If there are no events in the log, the event screen displays “No events in log.”<br />
See “Retrieving the Event Log” on page 48.<br />
38 | Operation