Installation Manual C15, C20, C25 - Waltco
Installation Manual C15, C20, C25 - Waltco
Installation Manual C15, C20, C25 - Waltco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 4<br />
OPTIONAL INSTALLATION<br />
If the 5-<br />
plate must be added.<br />
<strong>Installation</strong><br />
1/4<br />
sides of mount plates and<br />
adapter plates as shown.<br />
Shield all wires and hoses from heat and<br />
weld splatter.<br />
5-<br />
Min.<br />
1/4<br />
Weld mount tube to mount plates. Weld all around, both<br />
sides of mount plates, and ends, with 1/4" weld.<br />
To avoid injury or property damage, do not<br />
remove<br />
clamps from deck. Use forklift, crane, or<br />
other safe<br />
means to support deck and then remove<br />
clamps.<br />
5-<br />
Min.<br />
adapter<br />
plate<br />
1/4<br />
around both sides and<br />
ends of mount plates.<br />
GR00473<br />
NOTE:<br />
If necessary, liftgate may be mounted to inside of<br />
frame as shown.<br />
Truck Frame<br />
5-<br />
Weld channel<br />
to Truck Frame<br />
with weld.<br />
Weld 100% all<br />
around as<br />
shown.<br />
3<br />
Weld Mount Plate to<br />
channel with 1/4<br />
after channel is welded<br />
to the Truck Frame.<br />
GR01713<br />
Page 16