Your Sky+ remote control - clickspares.co.uk

❖
Adding Other Channels
There is normally no need for you to tune in satellite channels because
Sky Guide tunes in all the available channels for you, including new
channels as they are added to the digital satellite TV service.
Your Sky+ set top box is designed for receiving digital television signals
transmitted at 28.2 or 28.5 degrees East, either unencrypted or
encrypted using BSkyB’s encryption system. Reception of other digital
satellite signals may be possible but is not guaranteed.
If you want to tune in other channels that are not listed in Sky Guide,
for example foreign-language channels, complete the following steps:
1. Select the Add Channels option from the System Setup screen.
The Add Channels screen appears on your TV.
2. Highlight Frequency and use the numbers to key in the
transponder frequency.
3. Highlight Polarisation and use the left or right arrow to set the
polarisation for the transponder.
4. Highlight Symbol Rate and use the left or right arrow to set the
symbol rate for the transponder.
5. Highlight FEC and use the left or right arrow to set the FEC
setting for the transponder.
6. Highlight Find Channels, then press select. Sky Guide checks the
settings you entered and looks for any new channels at those
settings.
64 Sky+ User’s Guide