VALVES - Norgren Pneumatics. Motion Control Equipment, Fluid ...

More documents

Recommendations

Info

Adjustable delay, up to 50 seconds Time delays available in two functional models for 0 to 5 and 0 to 60 second delays Time Delay on Operate and Time Delay on Release, normally open and normally closed available Can be used in conjunction with most Norgren Poppet valves Technical Data Medium 3-Port/2-Position Time Delays: Filtered, nonlubricated dry compressed air. Other Time Delays: Filtered (5-micron), nonlubricated, dry compressed air at a constant pressure and temperature. The finer the filtration and the closer the regulation, the better the accuracy and repeatability of the time delay. Mounting Through-holes in valve body, inline, or on valve. Port Size 3-Port/2-Position Time Delays: 1/4" PTF, BSPP, or ISO Rc. Operating Pressure Range 3-Port/2-Position Time Delays: 30 to 150 psig (2.1 to 10.3 bar). Other Time Delays: Equal to or greater than main valve inlet pressure but not less than 30 psig (2.1 bar) and not greater than 150 psig (10.3 bar). Operating Temperature All Time Delays: 35°F to 130°F (2°C to 54°C). Consult Technical Service for use below 35°F (+2°C). Materials Body: Aluminum alloy body, acetal, or aluminum check valve, stainless steel adjusting screw. Elastomers: Nitrile rubber seals. Prospector Series Poppet Valves Norgren.com/usa – 303.794.2611 – help@amer.norgren.com Smooth Start Valves and TIme Delay Options 3-Port/2-Position Time Delay Valves Norgren Time Delay Valves consist of a 0 to 60 second time delay fitted with an A1 air operator and a special bottom cap with IN and OUT ports. They are used to provide delayed actuation or release of valves or other pneumatic devices that do not require large air flows. Symbol Type Port Cv Factor Model Weight Size In to Out Ports Out to Exhaust Ports lbs (kg) EXH EPS EXH EPS SIG IPS MV SIG IPS MV * Thread: Insert 4 for BSPP; 1 for PTF; or 6 for ISO Rc. Exhaust Port 1/8" NPTF Do Not Restrict External Cavity Port 1/8" NPTF Normally Closed, Time Delay on 1/4" 0.15 0.16 Z0002A 2.06 Operate (TDO) (0.94) Normally Open, Time Delay on 1/4" 0.16 0.09 Z0003A 2.06 Operate (TDO) (0.94) Adjustment Screw External Pilot Supply Port 1/8" NPTF 3.06 (78) 2.13 (54) Typical all models Model 23 and 24 1.53 (39) Model 22 3.06 (78) VAL-195 VALVES
VALVES Prospector Series Poppet Valves Smooth Start Valves and TIme Delay Options 0 to 5 Second Time Delays, & 0 to 60 Second Time Delays - Standard Applications and Special Applications For Use With Air and Solenoid Operated Poppet Valves Most Norgren solenoid and air operated poppet valves can be equipped with an adjustable 0 to 5 or 0 to 60 second time delay. Both available in two functional models. (1) Time Delay on Operation (TDO), which delays shifting of the main valve poppet on application of the pilot signal, and releases the poppet immediately upon removal of the signal, and (2) Time Delay on Release (TDR), which shifts the main valve poppet immediately upon the application of the pilot signal, and delays release of the poppet on removal of the signal. Norgren Air Pilot Operated Poppet Valves can be equipped with a Special Application 0 to 60 second One Shot Model, which shifts the main poppet respectively upon application of the pilot signal and releases the poppet after the time delay period is completed. Ordering Information Use only with valves as defined in the following diagram. To order valves with a time delay, note the desired valve model number from previous pages in Section 10. Insert the desired time delay model number in the 7th and 8th positions of the valve model number as shown in the following diagram. For example: for a 4-Port/2-Position Air Pilot Operated Inline valve, F1024C-00-A1, with a 0 to 5 Second Time Delay on release order: F1024C-02-A1. For 0 to 5 second time delay - DO NOT USE WITH 2" basic valves. For 0 to 60 second ONE SHOT SPECIAL APPLICATION - DO NOT USE WITH 3-way twin valves. There must be an A, B, C, D, E, or F in the 1st position of the desired valve model number. NOTES: * Valves with an internal pilot supply are identified by a C in the 6th position of the model number. See Figure 1(on following page) for installation. ALTERNATE CONFIGURATION - MODE - 23 ONE SHOT TIME DELAY: The Alternate Configuration of Model 23 Time Delay (see next page for description) requires an unrestricted internal pilot supply passage. Select the desired valve model number as described above, then change the 6th position of the model number to B, i.e. D1022B-23-A1, when ordering Model 23 Alternate Configuration. See figure 1 for installation. When used with valves that have an external pilot supply (designated by an H or J in the 6th position of the valve model number), the pilot supply must be connected to the operator (Figure 2). Zero to five second time delays do not have an external pilot supply port. ** An adjustment screw provides an adjustment range of 0 to 5 or 0 to 60 seconds. For 0 to 60 second only this range can be extended by increasing the volume of the time delay cavity in the timer body. A port is provided in the body for connecting an additional external cavity which can consist of a short length of pipe (capped at one end) or other similar air receiver. Increasing the cavity an additional 29.5 cubic cm., (1.8 cubic inches) will roughly double the delay time for the same adjustment screw setting.There must be an A, B, C, D, E, or F in the 1st position of the desired valve model number. VAL-196 Position in Model Number 1 2 3 4 5 6 7 8 9 10 0 0 There must be a C, H, or J in the 6th position of the desired valve model number.* Time Delay Models** Weight lbs. (kg) 0 1 0 to 5 Second 0.68 Time delay on operate. (0.31) 0 2 0 to 5 Second 0.68 Time delay on release. (0.31) 0 to 60 Second 0.95 0 3 Time delay on operate; (0.43) Normally closed. 0 to 60 Second 0.95 0 4 Time delay on release; (0.43) Normally closed. 0 to 60 Second 0.95 2 3 One Shot Time delay; (0.43) Normally open. For 0 to 60 Second, One Shot Models, there must be an A1 or AA in the 9th and 10th position of the desired model number. Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
Page 1 and 2:
VALVES VALVES An unmatched, state-o
Page 3 and 4:
VALVES VALVES Solenoid and Air Pilo
Page 5 and 6:
VALVES Valve Manifolds VS18 Series
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
VALVES Fieldbus accessories Symbol
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
VALVES Fieldbus accessories Symbol
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
VALVES V40/V41 Mini ISO Star Valves
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
VALVES ISO Star Series Valves 5/2 a
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
VALVES Valve Manifolds, VM10 Series
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
VALVES Valve Islands VM15 Series Va
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
VALVES V50 ... V53 Series 3/2, 5/2
Page 129 and 130:
VALVES V50 ... V53 Series Solenoid
Page 131 and 132:
VALVES V50 ... V53 Series Manifold
Page 133 and 134:
VALVES V50 ... V53 Series 3/2 Doubl
Page 135 and 136:
VALVES V50 ... V53 Series 5/2 Doubl
Page 137 and 138:
VALVES V50 ... V53 Series 3/2 Singl
Page 139 and 140:
VALVES V50 ... V53 Series 5/2 Singl
Page 141 and 142:
VALVES V50 ... V53 Series Dimension
Page 143 and 144:
VALVES V50 ... V53 Series Manifold
Page 145 and 146:
VALVES V60-V62 Series 3/2, 5/2, 5/3
Page 147 and 148: VALVES V60-V62 Series 3/2, 5/2, 5/3
Page 149 and 150: VALVES V60-V62 Series 3/2, 5/2, 5/3
Page 151 and 152: VALVES V60-V62 Series 5/2 and 2 x 3
Page 153 and 154: VALVES V60-V62 Series 3/2 and 2 x 3
Page 155 and 156: VALVES V60-V62 Series 5/2, 5/3, and
Page 157 and 158: VALVES Nugget 200 Spool Valves 1/4"
Page 165 and 166: VALVES Nugget 500 Series Valves 5/2
Page 167 and 168: VALVES Nugget 500 Series Valves 5/2
Page 169 and 170: VALVES Herion Pilot Operated Soleno
Page 171 and 172: VALVES Herion Air Operated Valve wi
Page 173 and 174: VALVES Herion Solenoid operated val
Page 175 and 176: VALVES Herion Solenoid operated val
Page 177 and 178: VALVES Herion Air operated valve 4
Page 179 and 180: VALVES Series 97100 NAMUR 3/2-, 5/2
Page 181 and 182: VALVES Series 97100 NAMUR Dimension
Page 183 and 184: VALVES Excel 15 (M/54, DM/54) Solen
Page 185 and 186: VALVES Cartridge Solenoid Valve Com
Page 187 and 188: VALVES Prospector Series Poppet Val
Page 197: VALVES Prospector Series Poppet Val
Page 207 and 208: VALVES Herion 3 way (3/2) Poppet Va
Page 209 and 210: VALVES Herion 4 way (4/2) Poppet Va
Page 215 and 216: VALVES Super X Manually & mechanica
Page 217 and 218: VALVES Super X 12 12 12 12 14 14 1/
Page 223 and 224: VALVES VHLA Series Rotary Hand Valv
show all

VALVES - Norgren Pneumatics. Motion Control Equipment, Fluid ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?