Contents - Raspberry PI Community Projects

AFLEX Robotic Board
AFLEX Robotic Board (http://www.web4robot.com) is dual motor control and data
acquisition board with I2C and Serial interfaces. The board provides 2 motor control
drivers with max current up to 3.5A, 8-bits data port with each pin setup as digital input
/output or analog input, 10-bits ADC with up to 5 analog channels, 4 inputs for the sensor
connections, infrared (IR) remote control. The board provides direct connection to
Raspberry Pi.
ADC Pi
ADC Pi from AB Electronics UK brings 8 channel 15 bit analogue sampling to the
Raspberry Pi platform. A buffered 5V i2c bus and stackable headers make this a useful
addition to your Raspberry Pi project. http://www.abelectronics.co.uk/default.aspx (see
also: setup tutorial)
Arduino Shield and Raspberry Pi
a little board with Arduino socket and Raspberry Pi socket you can power the boards with
12Volt or 5Volt http://www.progetti-hw-sw.it/raspberry.htm
Buffer Board
Buffer Board (http://www.thebox.myzen.co.uk/Raspberry/Buffer_Board.html) How to
make a Pi Buffer on Veroboard. Each of the 14 outputs can drive up to 500mA using a
Darlington array.
Buzzberry Buzz-Board Interface
Buzzberry (http://fortito.com) is an interface board enabling expansion using the Buzz-
Board modular system designed primarily for educational use.
CJE/4D RTC
On 2nd January 2012, CJE/4D announced that they have a real-time clock (RTC)
expansion board in the works: [1] (http://www.raspberrypi.org/forum/features-andrequests/rtc)
GertBoard
main page: RPi Gertboard
This board is a buffer between your Rpi and the real world, use it to flash LEDs on and
off, drive motors, run sensors and all that other fun stuff. [1]