Contents - Raspberry PI Community Projects

More documents

Recommendations

Info

Hardware & Peripherals: Hardware and Hardware History. ▪ 20.6 USB Missile Launcher ▪ 20.7 USB Docking Stations ▪ 20.8 USB RFID Reader ▪ 20.9 JTAG ▪ 20.10 USB 3.0 Multi-Card Reader ▪ 21 PS2 / AT to USB Converters ▪ 22 Power adapters ▪ 22.1 Working power Adapters ▪ 22.2 Problem power Adapters ▪ 22.3 External Battery packs (with 5V regulated output) ▪ 23 Display adapters ▪ 23.1 HDMI->DVI-D ▪ 23.2 HDMI->VGA converter boxes ▪ 23.3 DVI-D -> VGA active adapters ▪ 23.4 Composite->SCART ▪ 23.5 Composite->VGA converter boxes ▪ 24 SD cards ▪ 24.1 Preinstalled SD Cards ▪ 24.2 Working SD Cards ▪ 24.3 Problem SD Cards ▪ 24.4 Benchmarks ▪ 25 Foreign Language Translations ▪ 26 References Low-level Peripherals and Expansion Boards. Screens, Cases and Other Peripherals. A note about this page: For USB devices, please specify if they required a powered hub Notes 19-Apr-2012: Now that the Model B board is shipping, details added should relate to this board and the default Debian distribution (http://www.raspberrypi.org/downloads) unless stated otherwise. A suggested suffix markup scheme is as follows: ▪ (A) - Relates to model A production board
▪ (B) - Relates to model B production board ▪ (!) - Information from alpha and beta board days -- beta board verified peripherals should still apply to production boards for the most part, but the alpha board is fairly different ▪ No markup - relates to all production boards Discuss: http://www.raspberrypi.org/forum/?mingleforumaction=viewtopic&t=247 If you are adding to a product list it would help clarity if entries are kept/added in alphabetical order. Power Usage Notes Warning: Adding peripherals may increase the loading on the power supply to your board and this, in turn, may affect the voltage presented to the RPi. If the RPi's supply voltage falls below a certain value (anecdotally stated as around 4.75V), or it begins to fluctuate, your setup may become unstable. There is a Wiki section about this issue (http://elinux.org/ RPi_Hardware#Power) which is worth a read. Model B Hardware Revisions and USB Power limits Hardware Revision 1.0 The original Model B board had current limiting polyfuses which limited the power output of each USB port to approximatly 100mA. USB devices using more than 100mA had to be connected via a powered hub. The PI's PSU was chosen with a power budget of 700mA of which 200mA were assigned to the USB ports, so the Raspberry Pi's (poly)fuses were designed only for devices up to 100mA, and typical 140mA polyfuses will have as much as 0.6 volt across them when drawing currents near the 100mA limit. As a consequence the USB ports are only directly suitable for "single current unit" USB devices which, according to USB specifications, are designed to work with just 4.4 Volt. Not only do non single current unit devices draw more current (causing greater Voltage drops, and greater stress on the fuses), they also might require 4.75 Volt to work. Model B Hardware Revision 2.0 and Revision 1.0 with ECN0001 change This had the polyfuses removed, removing the 100mA current limitation for each USB port (but leaving the main fuse F3 intact). Users should still ensure their power supply can power the RPi and the USB peripherals. Revision 2.0 was released in August 2012. Linux Driver Issues Shortly after the Raspberry Pi was released it was it was confirmed that there were a number of issues with the Linux USB driver for the SMSC95xx chip. These included problems with USB 1.x peripherals that use split transactions, a fixed number of channels (causing problems with Kinect) and the way the ARM processor handles the SMSC95xx interrupts. [1] (http://www.raspberrypi.org/phpBB3/
Page 1 and 2:
RPi Buying Guide From eLinux.org Co
Page 3 and 4:
Farnell Worldwide Premier Farnell a
Page 5 and 6:
Q: If interest was obviously so hig
Page 7 and 8:
limited to batches of only 10k Rasp
Page 9 and 10:
References 1. ↑ http://en.wikiped
Page 11 and 12:
SD Card setup To boot the Raspberry
Page 13 and 14:
Copying the image to an SD Card on
Page 15 and 16:
1. These commands and actions need
Page 17 and 18:
▪ dd bs=4M if=~/2012-09-18-wheezy
Page 19 and 20:
Model: SD SD08G (sd/mmc) Disk /dev/
Page 21 and 22:
RPi Hardware Basic Setup From eLinu
Page 23 and 24:
NOTE: An RPi SD card can only be us
Page 25 and 26:
1. Micro-B USB Power Cable (see abo
Page 27 and 28:
One promising device is the Cymbet
Page 29 and 30:
External Links For a verbose guide
Page 31 and 32:
This page is a community work in pr
Page 33 and 34:
===================================
Page 35 and 36:
NOTE: If the partitions (/dev/sdc1
Page 37 and 38:
Setting up for remote access / head
Page 39 and 40:
continue to be able to address it i
Page 41 and 42:
An alternative startup guide for be
Page 43 and 44:
Where to start? Any easy question t
Page 45 and 46:
If you're unsure of which locale to
Page 47 and 48:
Debian Wheezy, using raspi-config D
Page 49 and 50:
Media Player With this configuratio
Page 51 and 52:
▪ Entering "sudo apt-get install
Page 53 and 54:
Tutorials - Guides - Projects - Tas
Page 55 and 56:
▪ 5.5 Networking no longer works
Page 57 and 58:
Green LED blinks in a specific patt
Page 59 and 60:
can only handle 100mA per USB slot
Page 61 and 62:
Get the latest firmware version The
Page 63 and 64:
Ethernet connects at 10M instead of
Page 65 and 66:
Some programs refuse to accept my p
Page 67 and 68:
Display Startx fails to start If yo
Page 69 and 70:
overscan_bottom=20 Interference vis
Page 71 and 72:
Composite displays no image The out
Page 73 and 74:
Troubleshooting power problems If y
Page 75 and 76:
Hardware versions/revisions Several
Page 77 and 78:
Raspberry Pi Model Wizard - Buying
Page 79 and 80:
# Set monitor mode to DMT hdmi_grou
Page 81 and 82:
hdmi_drive=1 Normal DVI mode (No so
Page 83 and 84:
hdmi_mode=46 1440x900 reduced blank
Page 85 and 86:
opt/vc/bin/tvservice -d edid.dat /o
Page 87 and 88:
Overclocking options Option Descrip
Page 89 and 90:
GPU core, h264, v3d and isp should
Page 91 and 92:
RPi Hardware From eLinux.org Conten
Page 93 and 94:
Low-level peripherals: Real-time cl
Page 95 and 96:
core clocked at 700MHz; ARM VFP. Th
Page 97 and 98:
Power ▪ High-resolution PCB front
Page 99 and 100:
the RPI itself, sometimes up to hal
Page 101 and 102:
Things that can cause problems ▪
Page 103 and 104:
Capacitor C6 (ringed) It's unlikely
Page 105 and 106:
RPi HardwareHistory From eLinux.org
Page 107 and 108:
Raspberry Pi Model-B Full Productio
Page 109 and 110:
Raspberry Pi Alpha Board ▪ Announ
Page 111 and 112:
10. ↑ (hand-mod) More on the beta
Page 113 and 114:
Introduction In addition to the fam
Page 115 and 116:
Each GPIO can interrupt, high/low/r
Page 117 and 118:
Colour legend +5 V +3.3 V Ground, 0
Page 119 and 120:
GPIO06 is LAN_RUN and is available
Page 121 and 122:
GPIO Code examples GPIO Driving Exa
Page 123 and 124:
); BLOCK_SIZE, PROT_READ|PROT_WRITE
Page 125 and 126:
# Set up GPIO 7 and set to input ec
Page 127 and 128:
gcc -o blink -I ../../src ../../src
Page 129 and 130:
GPIO Driving Example (Ruby) This ex
Page 131 and 132:
Model Wizard - Buying Guide - SD Ca
Page 133 and 134: Back to the Hub. Contents ▪ 1 Int
Page 135 and 136: AFLEX Robotic Board AFLEX Robotic B
Page 137 and 138: Pi232 RS232 board Pi232 (http://www
Page 139 and 140: MiniPiio Relay2 [7] (http://zuzebox
Page 141 and 142: line in it for commands. The interf
Page 143 and 144: RPi Screens From eLinux.org Back to
Page 145 and 146: http://www.hdfury.com/ Something si
Page 147 and 148: Nokia N8 has AMOLED 360x640 pixels
Page 149 and 150: RPi Cases From eLinux.org Back to R
Page 151 and 152: Back to the Hub. ▪ 32.5 Customiza
Page 153 and 154: Lego Case 2 I had a bit of a play i
Page 155 and 156: This unique case has an integrated
Page 157 and 158: The foldable case from "Andrew K" (
Page 159 and 160: Both bottom and top of the case are
Page 161 and 162: ModMyPi - Raspberry Topping Case Mo
Page 163 and 164: RepRap friendly cover for Raspberry
Page 165 and 166: Design One (http://www.thingiverse.
Page 167 and 168: FoamBox1.png FoamBox2.png FoamBox3.
Page 169 and 170: PI Sandwich Case BUD Industries is
Page 171 and 172: ▪ Customizable! ▪ Nearly Indest
Page 173 and 174: The PiSlab is made from a slab of 1
Page 175 and 176: Options 4 Different Design Access t
Page 177 and 178: Polycase Pi Series Case The new Pi
Page 179 and 180: Tek Berry.40 Length: 100.6 Width: 7
Page 181 and 182: Raspberry Pi Model Wizard - Buying
Page 183: Back to the Hub. Contents ▪ 1 Not
Page 187 and 188: ▪ F5U706ea/uk 2-in-1 Hub (USB 2.0
Page 189 and 190: ▪ Logik L4THUB10 4 Port powered h
Page 191 and 192: Problem USB Hubs Please check known
Page 193 and 194: thing is that RPi powers on when I
Page 195 and 196: ▪ A4 Tech ▪ Model KL-5 USB Keyb
Page 197 and 198: ▪ EBO-013 Wireless 2.4GHz compact
Page 199 and 200: ▪ Comfort Wave 450, labeled 100mA
Page 201 and 202: ▪ ONN Keyboard Stock No: ONA11HO0
Page 203 and 204: ▪ Trust 17916 Compact Wireless En
Page 205 and 206: ▪ G510 Gaming Keyboard - lagging
Page 207 and 208: ▪ DX-WMSE (100mA) (B) ▪ Fellowe
Page 209 and 210: ▪ Samsung model:AA-SM3PCPB usb Op
Page 211 and 212: USB WiFi Adapters See also: http://
Page 213 and 214: ▪ Belkin Components F7D1101 v1 Ba
Page 215 and 216: ▪ Edimax ▪ EW-7811Un (http://ww
Page 217 and 218: ▪ MSI ▪ Micronet SP907NS, 11N W
Page 219 and 220: ▪ SMC ▪ SMCWUSBS-N : Hardware d
Page 221 and 222: Wheezy) as it includes the needed 8
Page 223 and 224: ▪ Apple ▪ Apple USB Ethernet Ad
Page 225 and 226: Tested on Raspbian and Archlinux. D
Page 227 and 228: ▪ Webcam C100 Model Number V-U001
Page 229 and 230: correctly on boot. You may need to
Page 231 and 232: USB RFID Reader JTAG ▪ Unbranded
Page 233 and 234: ▪ Universal USB Wall Charger (5V
Page 235 and 236:
▪ RS Components' ▪ HNP06UK (RS
Page 237 and 238:
Display adapters Note that active c
Page 239 and 240:
hdmi_mode=36 disable_overscan=1 Acc
Page 241 and 242:
Working SD Cards ▪ 4GB SDHC Class
Page 243 and 244:
▪ 8GB SDHC Class 4 (doesn't reboo
Page 245 and 246:
▪ Mushkin ▪ 16GB SDHC Class 10
Page 247 and 248:
▪ 32GB SDHC Class 10 (MB-SSBGA, M
Page 249 and 250:
(http://www.amazon.co.uk/gp/product
Page 251 and 252:
▪ 32GB SDHC Class 10 (http://www.
Page 253 and 254:
▪ 4GB SDHC Class 4 — hasn't wor
Page 255 and 256:
(http://www.raspberrypi.org/phpBB3/
Page 257 and 258:
Page 259 and 260:
We're not currently using a bootloa
Page 261 and 262:
Performance Performance Page Progra
Page 263 and 264:
Back to the Hub. Software & Distrib
Page 265 and 266:
Fedora Remix (http://fedoraproject.
Page 267 and 268:
Wiki & Main site (http://androidpi.
Page 269 and 270:
The generally small system that pro
Page 271 and 272:
ha-pi ▪ Main Site (https://source
Page 273 and 274:
FreeBSD Details and install guide o
Page 275 and 276:
GeeXboX ARM GeeXboX is a free and O
Page 277 and 278:
RPi Kernel Compilation From eLinux.
Page 279 and 280:
From a foreign machine Firmware cd
Page 281 and 282:
From opensource.apple.com, download
Page 283 and 284:
Page 285 and 286:
CPU Linpack The Arm has been tested
Page 287 and 288:
Reps Time(s) DGEFA DGESL OVERHEAD K
Page 289 and 290:
cast cbc 5068.25k 6020.03k 6345.71k
Page 291 and 292:
armhf "driver info" : http://i.imgu
Page 293 and 294:
Extrememory SDHC 16GB class 10 (man
Page 295 and 296:
Patriot SDHC 32GB Class 10 UHS-1 (P
Page 297 and 298:
SanDisk SDHC 32GB class 6 SanDisk u
Page 299 and 300:
Sandisk Ultra SDHC I Class 6 ("30MB
Page 301 and 302:
65.1 + 48.8 69.5 + 29.1 90.8 + 91.4
Page 303 and 304:
RPi Programming From eLinux.org Bac
Page 305 and 306:
Graphical Programming ▪ Gambas (h
Page 307 and 308:
Page 309 and 310:
Kernel Compilation - advice on comp
Page 311 and 312:
ilclient helper library This librar
Page 313 and 314:
egistry/egl/specs/eglspec.1.4.20110
Page 315 and 316:
specs/openvg-1.1.pdf) or the API qu
Page 317 and 318:
RPi Tutorials From eLinux.org
Page 319 and 320:
Community Pages: Tutorials - a list
Page 321 and 322:
DracoSoftware (http://dracosoftware
Page 323 and 324:
5V Power Supply construction - How
Page 325 and 326:
Live mp3 streaming from audio-in wi
Page 327 and 328:
RPi Guides From eLinux.org Back to
Page 329 and 330:
web browser Easy Suitable for begin
Page 331 and 332:
Installing Ruby on Rails Share your
Page 333 and 334:
Using Skypekit Pre-configuring SD c
Page 335 and 336:
RPi Projects From eLinux.org Back t
Page 337 and 338:
BerryTerminal (http://www.berryterm
Page 339 and 340:
Digital Signage Retrieved from "htt
Page 341 and 342:
The Raspberry Pi Foundation is a UK
Page 343 and 344:
5. Optional USB driver for 2-device
Page 345 and 346:
R-Pi System/Data Management --Meltw
Page 347 and 348:
Page 349 and 350:
101-200 Raspberry Pi Foundation ann
Page 351 and 352:
RPi Education From eLinux.org Conte
Page 353 and 354:
Computer History Museum, Silicon Va
Page 355 and 356:
used for Desktop apps, Daemon/Servi
Page 357 and 358:
fundamentals of computer programmin
Page 359 and 360:
▪ https://github.com/ntoll/Raspbe
Page 361 and 362:
RPi Community From eLinux.org Back
Page 363 and 364:
▪ RasPi Forums on EduGeek.net (ht
Page 365:
References 1. ↑ http://www.pyroso
show all

Contents - Raspberry PI Community Projects

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?