09.11.2012 Views

Contents - Raspberry PI Community Projects

Contents - Raspberry PI Community Projects

Contents - Raspberry PI Community Projects

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

This page is a community work in progress in preparation for the first users. If something<br />

doesn't work or isn't covered in these guides, please feel free to ask on the Forum<br />

(http://www.raspberrypi.org/?page_id=43) . But before you ask there, make sure you read<br />

the FAQs (http://www.raspberrypi.org/?page_id=8) .<br />

This page is based on BeagleBoardBeginners so the serial port info is appliable only<br />

under explained circumstances. Also, many <strong>Raspberry</strong> Pi users will buy pre-programmed<br />

SD cards and can skip to reading RPi Hardware Basic Setup. We expect that once<br />

<strong>Raspberry</strong> Pi boards become generally available helpful volunteers will update this page<br />

to match <strong>Raspberry</strong> Pi completely or point to better information elsewhere.<br />

This page in a major work in progress!<br />

Finding hardware and setting up<br />

Main article: see RPi Hardware Basic Setup<br />

You'll need to copy an image to a suitable SD card (or make your own image). You'll also<br />

need a USB keyboard, TV/Monitor (with HDMI/DVI/Composite/SCART input), and<br />

power supply (USB charger or a USB port from a powered USB Hub or another<br />

computer). All of which can be found over at the Pi Huts' <strong>Raspberry</strong> Pi Store<br />

(http://thepihut.com/)<br />

You'll likely also want a USB mouse, a case, and a USB Hub (a necessity for Model A).<br />

A powered USB Hub will reduce the demand on the RPi. To connect to the Internet,<br />

you'll need either an Ethernet/LAN cable (Model B) or a USB WiFi adaptor (either<br />

model). See RPi VerifiedPeripherals for more information on supported peripherals.<br />

When setting up, it is advisable to connect the power after everything else is ready. See<br />

RPi_Hardware_Basic_Setup#Connecting_Together.<br />

Serial connection<br />

For help setting up a serial connection with the <strong>Raspberry</strong> Pi, see<br />

RPi_Serial_Connection.<br />

Advanced SD card setup<br />

Now we want to use an SD card to install some GNU/Linux distro in it and get more<br />

space for our stuff. You can use either an SD or SDHC card. In the latter case of course<br />

take care that your PC card reader also supports SDHC. Be aware that you are not dealing

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!