Contents - Raspberry PI Community Projects

(http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071) on
6/22/12
▪ 8GB SDHC Class 6 Ultra I (BI1201221964G) - Boots kernel but won't
run init ( mmc timeout waiting for interrupt )
▪ 8GB SDHC Class 6 Extreme (BI1101116253G)
▪ 8GB SDHC Class 10 Extreme (BI1108716254G)
▪ 8GB SDHC Class 10 Extreme (BI1201416254G) - Still doesn't work
with Debian Wheezy beta (2012-06-18)
▪ 8GB SDHC Class 10 Extreme (BI1201516254G) [amazon.co.uk
(http://www.amazon.co.uk/gp/product/B00422FBJ2) ]+amazon.fr works
with wheezy 19/09/2012
▪ 8GB SDHC Class 10 Extreme (BI1200916252D/SDSDX-008G-X46) -
Tried with Debian "Squeeze"(19/04/2012), Debian "Wheezy"(18/06/
2012) and Arch Linux(13/06/2012). None works. With Debian
"Wheezy" Green LED stays ON continuously, with the other two it turns
on very faint.
▪ 8GB SDHC Class 10 Extreme Pro- Works with updated kernel/firmware,
stock debian6-19-04-2012 boots kernel but won't run init ( mmc timeout
waiting for interrupt )
▪ 16GB SDHC Class 10 Extreme (30MB/s HD Video) (SDSDX3-016G-
X46) - Doesn't boot with debian6-19-04-2012.img, or newer firmware
(tested 2012-06-17).
▪ 16GB SDHC Class 6 Ultra (BL1202021933G)
▪ 16GB SDHC Class 6 Ultra I (BL1205921933G) - Boots kernel but won't
run init ( mmc timeout waiting for interrupt )
▪ Silicon Power
▪ 32GB SDHC Class 6 (LS2N732GQON03ASP) - boots
debian6-19-04-2012.img, but frequent slow response / system hangs.
▪ TDK
▪ 4GB SDHC Class 6 (S404G1041) - Tried (end May 2012) with new
kernel.img and start.elf [49] (https://github.com/raspberrypi/firmware/
tree/master/boot) but still won't run init.
▪ 4GB SDHC Class 6 (S404G1046) [Barcode: 4 902030 784447] - Tried
(4th June 2012) with debian6-19-04-2012.img and with replacement
kernel.img and start.elf from github [50] (https://github.com/raspberrypi/
firmware/tree/87a04c0be0c05e20f94f223183a0310b37c9bd89/boot) but
still got 'Error -84' and 'Kernel panic - not syncing: No init found'
▪ Transcend
▪ 2GB MicroSD (MMAGR02GUECA-MB) - reads fine initially after
image was written on a PC, gives mmc0 timeout errors reading back data
after writing a large amount (in this case with 'pacman -Syu'). Still seems
to work, but is *very* slow after this happens, even across reboots.
▪ 32GB MicroSD (TS32GUSDHC4) - Doesn't boot.
▪ 2GB SD (6451AG 2G O2DS1)