09.11.2012 Views

Contents - Raspberry PI Community Projects

Contents - Raspberry PI Community Projects

Contents - Raspberry PI Community Projects

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

USB WiFi Adapters<br />

See also: http://www.element14.com/community/docs/DOC-44703/l/raspberry-pi-wifiadapter-testing<br />

There is a howto on installing the TL-WN722N adapter here (http://elinux.org/<br />

RPi_Peripherals#Wireless:_TP-Link_TL-<br />

WN722N_USB_wireless_adapter_.28Debian_6.29) , which also acts as a guide for<br />

installing others too.<br />

Working USB Wifi Adapters<br />

These adapters are known to work on the <strong>Raspberry</strong> Pi. This list is not exhaustive, other<br />

adapters may well work, but have not yet been tried.<br />

Note: A WiFi adapter will probably need more power than the <strong>Raspberry</strong> Pi USB port<br />

can provide, especially if there is a large distance from the WiFi adapter to the WiFi<br />

Access Point. Therefore, you may need to plug the WiFi adapter into a powered USB<br />

hub.<br />

▪ 3COM<br />

▪ 3CRUSB10075: ZyDAS zd1211rw chipset (!)<br />

▪ 7DayShop<br />

▪ W-3S01BLK, W-3S01BLKTWIN : Unbranded product available from<br />

7DayShop, in a single or twin pack. [22] (http://www.7dayshop.com/<br />

catalog/product_info.php?cPath=777_9&products_id=112046) , [23]<br />

(http://www.7dayshop.com/catalog/<br />

product_info.php?&products_id=112527) . Tested on Debian Wheezy,<br />

with the dongle attached directly to the RPi along with the wireless<br />

keyboard receiver. Shows up as a Ralink RT5370 device, and no drivers<br />

or additional software downloads required. Created wpa.conf, edited<br />

'interfaces' file and restarted the networking. The manufacturer portion<br />

of the MAC address (7cdd90) is assigned to "Shenzhen Ogemray<br />

Technology Co., Ltd."<br />

▪ It works without additional software connected directly to a Rev 2 Pi but<br />

stops working after a period of time (3 to 4 hours) with a fully updated<br />

Wheezy and all the 'USB workarounds' [24] (http://elinux.org/<br />

Rpi_USB_check-list) in place.<br />

▪ Alfa<br />

▪ AWUS036NEH: Tested on Debian Squeeze (with Ralink firmware<br />

package)<br />

▪ AWUS036NH: Tested on Arch Linux ARM using the rt2800usb module.<br />

▪ AWUS036NH: Tested on Debian Wheezy (with Ralink firmware<br />

package). Tested on Raspbian too (drivers from aircrack-ng).

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!