Contents - Raspberry PI Community Projects

Accessories
Some accessories will be made available from the shop, aswell as at The Pi Hut's
Raspberry Pi Store (http://thepihut.com/)
▪ USB Power Supply (UK/EU/US Compatible) [4]
▪ Pre-Prepared System SD-Card (software will be provided to prepare your own) -
size is unconfirmed
▪ Cases (will be available in a few months - i.e. Q2 2012)
▪ AddOn/Expansion Boards (will be available later on - i.e. GertBoard due soon)
See Typical Hardware You Will Need for details about other items you may require.
Price
The price is $35USD before shipping, duty, and tax, about $60 after.
Although the foundation is UK based, the guide price of the units are in USD since the
RPi components are sourced in USD$.
The price is $25USD (~£16GBP) for model A(not yet avalable), and $35USD
(~£23GBP) for model B.
Items will be subject to local Tax (i.e. UK will have 20% VAT added) and shipping cost is
not included.
See the following update on RS Components and Farnell global pricing
(http://www.raspberrypi.org/archives/826) (13th March 2012).
Clones & Copies
The foundation plans to release all the required schematics and plans to reproduce the
RPi hardware, so clones and copies will be welcome.
However, since the unit is built around the Broadcom SoC, the interested party will
require suitable sized orders to obtain them. The foundation were fortunate enough to be
supported in this aspect by Broadcom to enable the project to be feasible.