09.11.2012 Views

Contents - Raspberry PI Community Projects

Contents - Raspberry PI Community Projects

Contents - Raspberry PI Community Projects

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

▪ Edimax<br />

▪ EW-7811Un (http://www.edimax.co.uk/en/<br />

produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44) USB ID<br />

7392:7811, RTL8192CU, driver blob download<br />

(http://www.electrictea.co.uk/rpi/8192cu.tar.gz) via Element14<br />

(http://www.element14.com/community/docs/DOC-44703) , works with<br />

WPA2-AES-CCMP (howto (http://www.ctrl-alt-del.cc/2012/05/<br />

raspberry-pi-meets-edimax-ew-7811un-wireless-ada.html) ) (B) -<br />

Alternative driver download link that works with Raspian<br />

(http://dl.dropbox.com/u/80256631/8192cu-latest.tar.gz) . Note: With<br />

current raspbian (2012-09-18-wheezy) it is recognized immediately, the<br />

default module works fine; the configuration is easy using wireless-essid<br />

and wireless-key in /etc/network/interfaces.<br />

▪ The EW-7811Un can be powered directly from the <strong>Raspberry</strong> Pi if the<br />

<strong>Raspberry</strong> Pi is powered using a well regulated power supply.<br />

▪ A script-based installation for the EW-7811Un<br />

(http://www.edimax.co.uk/en/<br />

produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44) by MrEngman<br />

can be found on the RasPi forums (http://www.raspberrypi.org/phpBB3/<br />

viewtopic.php?f=26&t=6256&hilit=edimax) . Tested with Debian<br />

Squeeze and Raspbian. An installation guide can be found here.<br />

(http://dl.dropbox.com/u/80256631/install-rtl8188cus.txt)<br />

▪ Instructions for getting the EW-7811Un (http://www.edimax.co.uk/en/<br />

produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44) working in<br />

Raspbmc (tested RC3) can be found here (http://forum.stmlabs.com/<br />

showthread.php?tid=780) .<br />

▪ Simple step-by-step instructions for EW-7811Un<br />

(http://www.edimax.co.uk/en/<br />

produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44) which uses the<br />

RTL8192 chipset RPi_edimax_EW-7811Un(B)<br />

▪ EW-7318USg (http://www.edimax.com/en/<br />

produce_detail.php?pd_id=8&pl1_id=1&pl2_id=44) USB ID 148f:2573,<br />

rt73usb. RT2573 chipset. Works with powered usb-hub or shorted<br />

polyfuses.<br />

▪ EW-7711UAn (http://www.edimax.co.uk/en/<br />

produce_detail.php?pd_id=261&pl1_id=1&pl2_id=44) , Ralink RT2870,<br />

works perfectly on Arch with a powered hub (not tested without yet).<br />

Simply required wireless_tools and wpa_supplicant, the drivers/<br />

firmware are included in kernel 3.0. I followed the Arch Wireless Setup<br />

(https://wiki.archlinux.org/index.php/Wireless_Setup) instructions.<br />

▪ edup<br />

▪ [Edup 150MBPS wifi adapter (http://www2.buyincoins.com/details/<br />

usb-150m-wifi-wireless-lan-network-card-adapter-antennaproduct-1916.html)<br />

] USB ID: 148f:5370 Ralink Technology, Corp.<br />

RT5370 Wireless Adapter. Driver is the RT2800USB module, I had to

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!