Contents - Raspberry PI Community Projects

More infos on Marco's blog: http://marcoalici.wordpress.com
Raspi Case made a single sheet of polypropylen (PP)
Strong case cut from a single sheet of polypropylen
using a cutting plotter (video
(http://www.youtube.com/watch?v=HbKY9StiFqs) ),
made in germany by IP Adelt. Here's the story
(http://www.ip-adelt.de/produkte/neuigkeiten/
raspberry-pi-just-got-another-case/) . Sold via online
shop (http://www.ip-adelt.de/shop/) to the whole
world - in a simple envelope!
Raspberry Pi case from IP Adelt
Review of the Beta version of the case on the PiPod blog
(http://raspberrypipod.blogspot.co.uk/2012/08/rpi-case-review-ip-adelt-enclosurebeta.html)
Printable Mylar Sheet Fold-up Case
RaspberryPi.org forum user "eric_baird"
(http://www.raspberrypi.org/forum/projects-andcollaboration-general/printable-cases-using-ohp-film)
thought of printing an outline of the walls of a case on
a Mylar overhead projector (OHP) sheet or cardboard
that could then be cut out and folded into a case.
Multiple users have since drawn such cases that can be
printed on a Mylar sheet, thick paper, card stock,
cardboard. The printed parts can be cut with a sharp
knife or scissors and then folded/assembled into the
case.
Multiple models are available:
The foldable case from "tzj" (http://pdfcast.org/pdf/
raspberry-pi-card-case-revision-1) (currently based on the model B beta board).
The foldable case from "alexisread" (http://elinux.org/images/0/0c/Raspberrysandwich-1-0.pdf)
originally posted here (http://www.raspberrypi.org/forum/projectsand-collaboration-general/case-design-internal-mounting-raspberry-sandwich)
.