Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

Wisotronic dialog 1-Channel Central
Control Unit EWFS ® You will be confronted with certain symbols time and again when operating the
4.2 Explanation of the most
Important symbols used
4.2.1 Symbols: Manual
operation
Wisotronic.
The following symbols are always positioned in the lower line of the display. The
buttons below these symbols are used to operate your sunblind manually:
H
T
If the button below this symbol is pressed, your sunblind moves
up or an awning moves in.
If the button below this symbol is pressed, your sunblind moves
down or an awning moves out.
4.2.2 Symbols: Menu change,
modifying values
The following symbols are always positioned in the lower line of the display. The
buttons below these symbols are used to move through the menus or modify the
setting values:
{
}
If the button below this symbol is pressed, the system moves one
menu level down.
If the button below this symbol is pressed, the system moves one
menu level up.
—+
*
|
If the buttons below the plus or minus sign is pressed, the setting
values are modified.
If the button below this symbol is pressed, the cursor changes to
the next decimal place
If the button below the floppy disk symbol is pressed, your
settings are saved.
16
We reserve the right to carry out improvements
932806A0•816757•7974k0•08.10.2004