Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema
Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema
Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Wisotronic</strong> <strong>dialog</strong> 1-<strong>Channel</strong> <strong>Central</strong><br />
<strong>Control</strong> <strong>Unit</strong> <strong>EWFS</strong> ® In addition to the hierarchic warnings described above we use the following<br />
symbols:<br />
TIP<br />
This is used to mark text sections which contain additional<br />
explanations, information or hints.<br />
■ This sign identifies<br />
- Activities which you must carry out, or<br />
- Instructions which must be observed.<br />
2.1 Usage to the intended<br />
purpose<br />
ATTENTION<br />
The control system allows the connection of a conventional<br />
sun protection drive with a single-phase a.c. motor.<br />
Alternatively several sun protection drives can be connected<br />
together via motor control units.<br />
The approval of the manufacturer has to be obtained if the device<br />
is to be used to a purpose different to that described here. Usage<br />
which is not to the intended purpose can result in damage to the<br />
user or third parties as well as damage to the device itself, the<br />
connected devices or to the moving mechanical parts of the<br />
complete system.<br />
■<br />
Therefore always use our product to the intended purpose only!<br />
2.2 Target group<br />
These instructions are intended for all those persons who operate the device. If<br />
you require additional information, please contact your specialist dealer.<br />
Operation by persons who are not sufficiently qualified and<br />
informed can cause severe damage to the system or even<br />
damage to persons!<br />
ATTENTION<br />
■<br />
Mounting and commissioning may therefore only be carried out by<br />
correspondingly trained specialists! This personnel must be able to recognize<br />
dangers which can be caused by the mechanical, electrical or electronic<br />
equipment!<br />
ATTENTION<br />
If it is to be assumed that safe operation is not possible, the<br />
device may not be taken into operation or it must be shut<br />
down.<br />
■<br />
This assumption is justified if the device or the connecting cables show<br />
damage or if the device no longer functions.<br />
8<br />
We reserve the right to carry out improvements<br />
932806A0•816757•7974k0•08.10.2004
Change language