Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

Wisotronic dialog 1-Channel Central
Control Unit EWFS ® This operating mode simply only triggers move commands when limits are
6.3.6 Temperature control in the
"Direct control" operating
mode
exceeded. Continue here if you have selected this operating mode. Otherwise
skip this section. The following values can be changed:
Operating mode:
Direct control
Temp.
limit
UP
—24...
+74°C
Temp.
limit
DOWN
—24...
+74°C
Fig. 6-10:
Temperature control: Values which can be changed in the "Direct control"
operating mode
6.3.6.1 Temperature control
limit "UP"
The limit "UP" specifies the temperature from at the sunblind is to be moved up.
Example: You want the sun to support the process of heating your conservatory
on cold clear winter days. You can therefore specify for the control system from
which temperature the sun protection is to be moved up in order to let the
sunlight into the conservatory. The setting range is from –24°C to 74°C. If you do
not want to evaluate the limit "UP", you can also set the value
"0" (---) here. Proceed as follows in order to change the setting value:
■
Change to the temperature control menu as described above. Turn the
function dial until the following display appears:
Temperature
limit UP
22° C
— + | }
■ Change the setting values by using the buttons — + and then press the
button |(save). If you want to exit the menu without saving the changes,
press the } button twice consecutively. This completes the process.
40
We reserve the right to carry out improvements
932806A0•816757•7974k0•08.10.2004