MX-B382/SC Operation-Manual Start-Guide GB - Sharp

BEFORE INSTALLING THE SOFTWARE
VERIFYING SYSTEM REQUIREMENTS
SYSTEM REQUIREMENTS
Before installing the software described in this manual, make sure that your computer
satisfies the following requirements.
Operating
system
Computer
type
*1 The PCL5e printer driver will not run on any of the 64-bit editions of the Windows
operating systems, Windows Server 2008 and Windows 7.
*2 Includes the 64-bit edition.
*3 Compatible with models preinstalled with Windows 2000 Professional, Windows XP
Professional, Windows XP Home Edition, Windows 2000 Server, Windows Server
2003, Windows Vista, Windows Server 2008 or Windows 7, and which are equipped
standard with a USB interface.
*4 Cannot be used when the machine is connected with a USB cable. The PC-Fax
driver and scanner driver cannot be used.
26
Windows* 1 Macintosh* 4
Windows 2000 Professional,
Windows XP Professional *2 ,
Windows XP Home Edition,
Windows 2000 Server,
Windows Server 2003 *2 , Windows
Vista *2 , Windows Server 2008 *2 ,
WIndows 7 *2
IBM PC/AT compatible computer
Equipped with a
10Base-T/100Base-TX/1000Base-T
LAN board or equipped standard
with a USB 2.0/1.1* 3 port.
Display 1024 x 768 dots resolution and
16-bit colour or higher is
recommended.
Other
hardware
requirements
An environment that allows any of
the above operating systems to fully
operate.
Mac OS 9.0 to 9.2.2,
Mac OS X v10.2.8,
Mac OS X v10.3.9,
Mac OS X v10.4.11,
Mac OS X v10.5 to 10.5.8,
Mac OS X v10.6 to 10.6.2
An environment in which
any of the operating
systems listed above can
fully operate (including
Macintosh computers with
an Intel processor).